Skip to content
Contact

Cord 810/812

1.4KTopics

Cord 810/812

New Treasure

I recently purchased this new treasure on Ebay. I have no plans for it but believed it was something I needed to save for the future. I will try to post a picture here but I am VERY NEW to posting pictures as many know. Actually this is my

1 / 2
Last reply by Terry Cockerell

Cord Radiator Cap

I am wondering what material was used for the gasket under the radiator cap. Was it cork or some other material?

Last reply by E L

Cord 810 812 Standard Air Filter/Silencer ................. Internals.

Inside the Cord 810 812 Standard Air Filter/Silencer is a piece of padded material directly above the carburettor. The padded material is held in place by a sheet metal frame. I'm wondering why the material is there? I discovered mine had b

Last reply by Terry Cockerell

Interior Wood

Where can I see or get or purchase plans or pictures of the interior wood to fasten the door panels and top material for a sedan? When our 37 came into our ownership way back in 1961 we had a real basket case. No wood was found anywhere.. T

Last reply by Terry Cockerell

New Exhaust System

I'm looking to purchase the complete exhaust system from the maker in Canada. I want the system with the front resonator and when I mention complete that is from tail pipe tip to the porcelain manifold flange nuts. Are their any comments ei

Last reply by LV Mike

1937 Cord right side outside door handle

hello All. I'm in need of a right outer door handle for a 1937 812 Cord anyone have a extra one? thanks for your time. jose@singletonclassics.com

Last reply by Gary Parsons

Synchronizer release pressure?

Hello,  I have 5 pair of syncros here, about half apart. I have read to get the release pressure correct but can find no reference to these specs. I have three 2/3 that range from 40lbs to 100lbs and four 4th that range from 30lbs to 65lbs

Last reply by Jim OBrien

Cord parts including an engine

NOT MINE just sharing. DAYTON NEVADA https://www.facebook.com/groups/sierradrifter/permalink/27515650261433836/?sale_post_id=27515650261433836

Last reply by Gary Parsons

Happy 90th Birthday to all 810 Cords.

According to the Historical Sources the first production Cord with Serial No 810 1101 A came off the assembly line on 31st January 1936 at the Factory in West 18th St Connersville. I'm surprised other owners have not been celebrating this y

1 / 2
Last reply by Terry Cockerell

Dash lever bezel part identification help

Hello Everyone, I am working on clearing out the extra parts that I have that I will never need. I have this dash lever bezel that looks to be an early version and I would like to be able to accurately describe it when I sell it. The labels

Last reply by Gary Parsons