Gary ParsonsJul 25, 2026 Where can I see or get or purchase plans or pictures of the interior wood to fasten the door panels and top material for a sedan? When our 37 came into our ownership way back in 1961 we had a real basket case. No wood was found anywhere.. The Cord had 4 rolling tires and actually one was an original double sides whitewall. Any information for the wood is greatly appreciated....
Gary Parsons
Hi Gary.
I assume you are also missing the timber that is fitted inside the roof and above the doors ............................. would that be correct? These are fixed into the body and cannot be easily removed.
Is your Cord a Westchester or a Beverly ? I did make a set of drawings for the trunk opening frame of my Westchester.
I also have some drawings of other parts but not much.
If you could make contact with somebody also restoring a similar Cord it would be easier to borrow the parts and copy them.
Terry I have a Beverly. I have the wood above the doors and the roof. It's the wood or the way the door panels and front floor kick panels are secured to the body. I see what might be nail holes in the door panel frames but really have no idea what might be fastened there. Thanks for the emails too.
Gary Parsons
Gary ParsonsJul 26, 2026 Terry I have a Beverly. I have the wood above the doors and the roof. It's the wood or the way the door panels and front floor kick panels are secured to the body. I see what might be nail holes in the door panel frames but really have no idea what might be fastened there. Thanks for the emails too.
Gary Parsons
Gary re-reading your first Posting you said "When our 37 came into our ownership way back in 1961 we had a real basket case. No wood was found anywhere."
This is confusing as you now say you have the wood above the doors and in the roof.
There is also a wooden trim piece behing each of the B Pillars as well as wooden trip pieces around the rear wheel arches.
Do you have these?


Terry I mistakenly said no wood anywhere. I do have the center post wood and the roof wood. Its the wood behind the interior cloth I wonder about. What I do have is at least vintage 1936 wood and it has dried out. I wonder if a nail can be driven into it. I have no idea what the wood is around the rear view mirror or the windshields looks like.
Gary Parsons
Gary ParsonsJul 27, 2026 Terry I mistakenly said no wood anywhere. I do have the center post wood and the roof wood. Its the wood behind the interior cloth I wonder about. What I do have is at least vintage 1936 wood and it has dried out. I wonder if a nail can be driven into it. I have no idea what the wood is around the rear view mirror or the windshields looks like.
Gary Parsons
Gary, I just happen to have a copy of the original drawing of the Trim Stick - Windshield Center Pillar.
The wood that fits above the windshields is fairly easy to make. I had sent you a drawing showing the layout of the pieces and the metal strips that fit over them.
I will see what else I can find.
Gary, The door panels are secured to the door with clips. The panels do not screw into the wood. The arm rests and the window molding screw into the metal door frame. There are a couple of screws on the window molding on the top and the sloped side that screw into wood pieces.
Jim
Jim OBrienJul 29, 2026 Gary, The door panels are secured to the door with clips. The panels do not screw into the wood. The arm rests and the window molding screw into the metal door frame. There are a couple of screws on the window molding on the top and the sloped side that screw into wood pieces.
Jim
Thanks Jim. I was told something about the door trim years ago about it being VERY difficult to near impossible to find if mine was missing. I remember Stans paint information as to the contrast color it must be for each car color.
Gary Parsons
Gary ParsonsJul 29, 2026 Thanks Jim. I was told something about the door trim years ago about it being VERY difficult to near impossible to find if mine was missing. I remember Stans paint information as to the contrast color it must be for each car color.
Gary Parsons
HI Gary.
Did you receive the email I sent on how to make the door panels and kick panels?
The colour of the broadcloth in the attached pictures varies with the light.


Yes I did Terry. Thanks. Your door panels are very stunning. They appear smooth and perfect.
Gary Parsons
Gary ParsonsJul 30, 2026 Yes I did Terry. Thanks. Your door panels are very stunning. They appear smooth and perfect.
Gary Parsons
Hi Gary, I was scratching my head to remember the thickness of the compressed board. It was more like 5 to 6 mm thick rather than 3 to 4.
I'm very happy with the way they ended up and look really good.
I have not had a look for the spring clips but will today.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
