Don't run it on half a tab. It is not hard to recondition the water pump. You just need a new shaft made and a new bushing. As far as the broken off tab I would drill a small hole in the broken tab all the way through it and tap it. Then turn a bolt into the taped thread and when it bottoms out in the through hole it should jack the broken piece out. The problem is of course none of this is easy when it is in the car. Remove the gland nut to give you more room and the pressed in oil retainer can also be removed so you can see better. Good luck. Let us know if this works.
CORDially Mike
No, worked all day would not move, drilled and tapped a 6/32 needed to be bigger but thatÔÇÖs as big as I could get it.
If it was out maybe I could have got it, now only a edm would work now but not enough room so one tab itÔÇÖs all it will have. But thanks it was worth a try.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
