

Joel STOP. Put the bolts back on the engine block. If you continue you will drop the timing chain inside the case and will have to remove the engine to get it back on!!! The timing chain runs the water pump. The way to remove the pump is to split the pump at the impeller. The shaft has a slot that engages with the drive gear that is driven by the timing chain and once the pump is split the shaft will come out. Then you can replace shaft, bushing, or what ever you need to. I machine the gland nuts for modern seals and don't use packing. Hope I'm not too late. You still might have a problem if the automatic tensioner has tightened up a notch making the chain shorter and not allowing you to put the bolts back on, hope not.
CORDiallyMike

Glad I was on time!! I don't think sealed bearings are sealed against water seeping through, just keeping lub. in. I'm sure I will be corrected if that is not true.
CORDiallyMike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
