Contact the ACD Factory in Oklahoma.
I have them
mmsfld@aol.com

While you are messing around check the interlok switch also.
I have modern replacement clutch switches. $70.00 + shipping.
Pat Leahy

E LJun 16, 2026 I have them
mmsfld@aol.com
37beverlyJun 16, 2026 I have modern replacement clutch switches. $70.00 + shipping.
Pat Leahy
Pat,
Payments accepted ?
Shipping method ?
Ron
alsancleJun 16, 2026 While you are messing around check the interlok switch also.
Thanks for the insight, I have.
Tha clutch switch has been repaired way too many times.

Ron ReynoldsJun 16, 2026 Thanks for the insight, I have.
Tha clutch switch has been repaired way too many times.
The real advice I give everyone is toss the harness with the plug and swap in a one piece with a fake plug under the column. Problem is that I'm not sure you can get either anymore.
The fake ten pin plug is easy to make machining a piece of suitable aluminium bar.
Rhode Island Wiring Services was bought by Small's Auto Wire and continues to supply all of Rhode Island Wiring Services products.
The contact number is 401 789 1955 which is the same as that used by Rhode Island Wiring Services.
Not sure where they are located.

Terry Rhode Island wire is located in the state of Rhode Island USA. Addressing the comment about illuminating the 10 wire plug is one of the best ideas to come forwards. To actually understand this thing about it this way. You have 10 wires coming into this plug. Those 10 wires need to be connected to the 'inlet side" of the plug. Then those 10 pins need to connect to the other side where you have another 10 pins in the 'outlet side" of the plug. Then the harness from the transmission, clutch switch, and the shift cross shift plus the vacuum switch has another 10 wires. So counting up ALL these possible wire connections for shorts or corrosion adds up to 40 possible problem connections. But making the harness as a one piece is the better idea. Only down side is trying to remove this one piece harness. It turns into a big job because it becomes this huge long harness and it must come out thru the top of the steering column for issues. I was lucky enough to purchase 2 NOS plugs from Auburn Cord Parts in Oklahoma years ago. I was hoping to use them but time changes things....
Gary Parsons
Gary I' should have said "I'm not sure where Small's Auto Wire is located". I had a look in Google but could not see anything specific.
Terry CockerellJun 18, 2026 Gary I' should have said "I'm not sure where Small's Auto Wire is located". I had a look in Google but could not see anything specific.
Terry I was reading something about a year or more back about one of the employees taking over the wire harness business from the original owner who lost the building and business.. Kike who was a long time employee has got all the equipment and planned to reopen in Oct 2205 It was posted on this forum... Memory is fading...
I did an internet search and found this information.
Gary Parsons
Ron ReynoldsJun 16, 2026 Wanted Cord 810/812 clutch switch
Ron ReynoldsJun 16, 2026 Wanted Cord 810/812 clutch switch
Ron ReynoldsJun 18, 2026 Ron ReynoldsJun 16, 2026 Wanted Cord 810/812 clutch switch
Ron ReynoldsJun 16, 2026 Wanted Cord 810/812 clutch switch
I have located what appears to be a NOS switch. If itÔÇÖs not NOS then it wasnÔÇÖt used very much.
Thanks to everyone!!!!!
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
