It seems to me most big cover Co. would have a pattern for 810/12 Cords. If not you can send them measurements they request and they will make one. I did that for my L-29 years ago and my 35 Speedster.
CORDially Mike
Hi Woody, For the starting problem - changing position of the gear selector switch should have nothing to do with the starting since they are separate electrical circuits. For the grinding problem is it only in a certain gear or does it just randomly decide to grind? Is it on upshifting or down shifting? Do you pre-select your gears?
 
You might want to check the clutch switch is properly secured and adjusted as well as the clutch linkage. This could be causing both problems.
 
Jim
Jim, thank you very much. I just drove it a couple of days ago and it wouldn't start in neutral, but it did start in 3rd. When I preselected first and then put it the clutch, it wants to grind a little bit. I noticed that if i start in second, it doesn't grind. Seems to start off fairly easily that way.
Do you happen to know of anyone that works on Cords in either Northern or Southern California? Thank you.
Terry, once again, thank you very much for the advise and time. I'll contact him shortly.
 
Woody Yerxa
Hi Woody,
My name is Bill Kastanis and, like Roger, I am also in Santa Rosa.  I see from your River Vista Farms website that you are in Colusa so not so far away from us.  I speak with and see Roger fairly frequently and can help with communication if needed.  Roger does not really do e-mail but I am sure that he would be happy to help you over the phone.  If e-mail is better for you my e-mail is Rileypu29@yahoo.com and I can help with contact with Roger.  I am not close to as experienced as either Roger or Jim but I have just finished replacing the transmission in my phaeton and learned a lot in the process.  I am also in the directory if you would like to give me a call.
 
To better understand your starting issue can you please clarify about the starting issue if the problem is that the starter does not crank the motor or does the motor turn over but not start when the problem gears are selected?
 
Best regards,
Bill
Good afternoon William,
Thanks so much for taking the time and effort to reach out to me on my Cord question. I'll email you at the email you gave me on the form website, shortly.
Thank you,
Woody Yerxa
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
