The Serial No was only stamped in two places.
The tag on the RHS of the cowl is the first. On RHD cars the Serial No tag was on the LHS of the cowl.
The number is also on the RHS of the drive train frame, so if that is missing there is no way to determine what it was.
Regards,
Terry
Thanks, Terry.  I never saw another third location reference on any other websites, so I was starting to think there were only two locations.
 
I wish I knew the car's history & why the subframe is missing.  
 
 
Mike
Post a few pics, maybe someone has seen it before.
Include 1 of the firewall.
Pete
Hi Pete: I'll try to post some photos this weekend....not sure if I can get the photos from the cheap cell phone to an old laptop, but I'll give it a try.  They're not great quality photos, but I'll make sure to post a firewall photo & maybe a few from underneath the car.
 
 
Mike
I have some photos of the Cord.  One shows the firewall with no serial number plate.  Two photos are views of the underside from the rear passenger corner looking toward the driver side.  One photo has the rear passenger tire on the right, leaf spring & rear axle, and a U-shape bracket toward the top of the photo....not sure if that bracket would attach to a subframe.  The last photo looks toward the rear driver side tire....as you can see, there's a strap but no gas tank & no subframe.I've had a hard time finding any undercarriage photos of Cord sedans for comparison.Mike  
The "missing" sub frame you referred to is there. This is the frame that bolts into the front of the body and carries the engine and gearbox. I will look for a picture showing where to find the frame number. Found the sketch, my frame number is 586 which corresponds with Serial No 1586 A
The stamped numerals can be difficult to see as they used 1/2" high stamps that were probably hit by hand with a hammer leaving a light indentation.
Looking at the picture showing the side view of the car it is not possible to see if there are countersunk screws along the top of the rear fender stone guards.
Three countersunk screws would indicate the car was an 812 where as the 810 Cords had studs soldered to the back of the stone guards leaving a smooth surface on the outside.
At least you can hopefully find the frame number now.
 
Terry, a BIG thank you for the help & the sketch.  I really appreciate it.  I'll go back & look for the number when I get a chance. 
 
 
Thanks for the info, Terry....now I have a better idea about what this car is.  Being somewhat new to Cords, I'm not too familiar with some of the model changes & details, so that's a big help. 
 
George - good point about using paint remover....a lot of cars back then had real faint stampings.  
 
Next up....go to the storage garage....move a kit car that's sitting next to the Cord out of the way so I have more room to get to the RHS....
A few days ago I looked at the front subframe and found the 3-digit number between the 4 rivets/studs.  That stamping is definitely faint....I'm going back to the garage in a few days with a soft pencil & tracing paper to see if I can rub an image of the number onto the paper.  The number looks like either "033" or "833."  I'm leaning toward 033 because I didn't see the "x" in the middle of that first digit....it looks rounded like a zero at the top & bottom of the digit with nothing stamped in the middle....either way, it's definitely a poor stamp job.Also, I noticed that there's a difference in the font of each number "3."  The one in the middle is a flat-top 3 and the other is rounded.  I was wondering if that was possible when the number was stamped....not sure how consistent they were with fonts at the factory.  I'm pretty sure the third digit is a 3 and not an 8 based on sight, but I'll see what happens when I use the old "pencil-&-paper-rub-trick."If this car is an early production 1936 Cord 810, would 033 or 833 fit into the series of serial numbers for that year?  And let's say the basic serial number is 810-1033....would there be a letter at the end to indicate the non-bustleback body style for that year?(By the way, I saw the 2006 ACD forum post about serial numbers, where Josh Malks referred to a Westchester with the letter "A" and an 812 Beverly with "S".)I attached a couple of photos, which admittedly aren't very good, and the close-up of the number is lousy due to phone camera quality.  Thanks,Mike
I agree the numbers are difficult to see.
Yes the letter A refers to the Westchester with the fastback body. It is doubtful that the number is 033 as that would indicate it was one of the Hand Built Cords.
Looking at the pictures showing the firewall again the stiffening ribs pressed into the firewall appear to be the rounded "Production" type. My I suggest you purchase one of Josh Malks' books The Timeless Classic or Cord Complete. Taking a rubbing of the number will be best.
An extra hole had been cut through the frame with a lug welded on one side as seen in the first picture. This is not stock.
Thanks, Terry.  I've actually been looking for one of the Josh Malks books, but I haven't found a copy that isn't expensive, and money's tight till after Christmas.  But I will eventually pick up one or both knowing that they're great reference tools.The car has/had a mounted fiberglass reproduction RHS front fender, which I removed so I could get up close to the number with a flashlight (bad eyesight).  I still couldn't get a great photo, but I posted the best I can get.  The rub didn't work because the numbers are too faint, but I drew the numbers as they appear on paper, which I also posted below.What's pretty interesting is that there are FOUR number between the rivets with "1" as the first digit....not the usual "three digits on the frame & then add 1000" situation. I know there were some assembly line variations (like interior parts between the Beverly & Westchester), so maybe someone had a "1" stamper and used it for some reason?The second digit on the frame looks like an 8 in the photo (maybe image distortion), but up close it looks like two halves of a zero or an incomplete 8 because the middle of the digit is missing.  SInce 033 is unlikely, I'm betting that this is an 8.  If some of my online research is correct, a lot of the 3-digit serial numbers started with 8.I was able to see that the last digit is definitely an 8, missing part of its left side....just not hammered hard enough.To me it looks like "1838" between the rivets, so is a "810-1838" a safe bet for a serial number? The only other question is whether this is a Beverly or Westchester, to add the "S" or "A" respectively to the serial number .  The interior was gutted, so is there a way to tell from the exterior?  Not sure if the shroud on the coffin nose (under the hood) with the metal tubes indicates anything, though the Cords I've seen in online photos that look like this are usually tagged as Westchesters.I'll have to apply for a lost title once Dad's girlfriend fills out her paperwork for the DMV.  No title could be found in Dad's belongings, and there's a good chance he bought it without any title.  That's the big reason for the serial number question....just trying to be precise for the paperwork & the eventual new title. I was wondering about that lug....whoever welded it to the frame did a sloppy job, and it was done long ago.  To go along with that lug, it looks like a few nuts, bolts & washers were installed/replaced on the underside in a few locations too....I don't know who did (I doubt my dad did any work to the car).  My best guess is that Dad bought someone's old unfinished custom or "restomod" project.Mike
1837 and 1839 are known 36 Westchester's
Good chance for 1838 to fill the gap.
Mike if you find that it is 1838 then please contact Ron Irwin as it will be another previously unknow Cord.
Ron is not into emails. Last time I spoke to him which was quite a while ago he was struggling to hear me.
His home address is,
18319 Grayland Ave
Artesia CA 90701 - 5737
E L, thanks for that bit of info....that gets me closer to figuring out what the car is.  1838 would slot right in to those Westchesters you mentioned.
 
Terry, thanks for Ron's address. I take it he's a Cord historian who has a list of the cars that have been accounted for?  I think I saw his name somewhere on one of the classic car websites.....might've been an older article about Cords.
 
The title work has to be done soon, so I'll have to figure out how to present that serial number on the paperwork the girlfriend will fill out.  I am leaning toward 1838 based on what I saw on the frame + the information I learned here on the forum. 
 
I'll try to get a letter to Ron soon, and hopefully I'll be able to talk to him.
 
By the way, I appreciate all the help you guys have provided so far!  Big thanks to Terry who's been a real big help, especially with bits of info on these cars, the diagram & a lot more....I've learned a lot about the 1936-37 Cords in a short amount of time between the forum & internet research.  
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.










