I looked in the authourized accessary book for this and it did not show up. I believe someone made this but it appears to have been a huge undertaking.
 
 
Gary Parsons
Second look in the accessories bulletin has the order number for the description i gave as being N29227, which is the order number for the front mounted hood ornament. No pictures are shown in the accessories bulletin.
 
My copy of the bulletins is missing #s 1,2, 8, 19 and 21 for the time period of the 810's. It is possible that it could be described in one of those bulletins.
 
I checked at the museum last Sept. and they also didn't have copies of those bulletins or at least couldn't couldn't locate them. If anyone has copies of those numbers I would like to get them.
 
Is your project an 810 or 812?
John the picture I attached in the previous reply was probably from the time of Dallas Winslow.
So it the attached page in this reply. Note the demister fan has a basic case where as in the Cord Factory Accessories the demister fan is described as being "handsomely streamlined trimmed in chrome and can be finished to harmonise with car colour schemes."
 
 
I feel the hood ornament on Russ's Cord has been made up by a subsequent owner.
I once helped strip and part out a 1937 Berline many years ago and sent the rear divided and window and the intercom system out to a good friend club member in California. That Berline had the center and cowl hood strip and I thought it looked UGLY. 
I believe I have seen both here in California. The top of the hood mascot is not attractive for my taste. I did like the Berline divider when I saw it.  
Gary Parsons
 
Something very curious....I own the hand built 810 Phaeton sedan and an 810 hand built Westchester.  When the hoods were stripped on both cars, both hoods were drilled along the centerline for trim.
 
Mitch
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.



