Is this the bearing you are referring to?  My outer race is in the column and it looks like it could be destroyed in removing it.  It is in good condition so I am going to leave it.  There is no number on the inner race.  There are 5/32 loose balls that run in the races.  Here is a picture of what I have taken apart.  I am sure the complete bearing is no longer available.
Terry, I didn't even think about the steering box. Makes complete sense now where this bearing goes.Tom, that is the strangest bearing I've ever seen, certainly not something I'm going to find off the shelf. Thank you for the photo.I think I'm going to end up having to machine another bushing instead of the correct bearing. 
Thanks for the picture. It shows the problem. When I get there if I have an issue like yours. I will just machine a brass bushing from 660 brass like I used in my transmission gears.
 
 
Gary Parsons
Hi Adam, I jumped the gun thinking the upper bearing in the steering box had been replaced with a bush. You should be ok with making and fitting a bronze bush at the top end of the steering column.
Regards,
Terry
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.

.jpg.2eb52760ddc5623891a807b5a4ea57fe.webp)


