As the owner says in the listing, this was the 89th car off the production line.
The first 100 cars - serial number 1001 to 1100 were the "handbuilt" cars to get into the NY Auto Show. Production started with serial number 1101.
I saw this car a number of years ago. It is a very solid car, overall, and would be a great start for a restoration project.
Jim
If Jim tells you this is the "real thing" you can take that to the bank plus saying he has seen this car before clinches the deal. As toy a molested firewall I suspect that was from replacing the timing chain and gears in the past. Some owners or shade tree mechanics believed cutting the firewall out instead of removing the engine to repair a bad chain n gears was the frugal way of doing things. Sadly there are no "spare parts" for hand builts because every piece of the body was actually hand hammered to what you see today. But even that can be recreated with some work and a great body man. No matter, this is a known Cord and it is in the Historians book of knowledge .
I hope you purchase it and bring it to the next Auburn so everyone can marvel at it even if it's on a trailer....
Gary Parsons
good, so it checks out, i'd rather have a production model mainly
due to the fact that it's relatively easier to get parts for.
it's great that this is a known car and that it's solid.
apparently the story goes that the car was a failed attempt at a hot rod.
they tried to fit a Cadillac water pump on it and a blower. for a ford flathead.
luckily they were foiled and the car sat.
This is a Production Cord (early production) NOT a handbuilt.

Jim OBrienJan 25, 2026 This is a Production Cord (early production) NOT a handbuilt.
Jim, what were the differences between the early production and the later cars?
alsancleJan 25, 2026 Jim, what were the differences between the early production and the later cars?
I feel this "depends" on a persons determination as to what a hand built and early production means. Then there is the ever present "renumbered cars"... The hand builts were made in 1935 for the 1936 car show but they are known as 1936 hand builts... They actually were hand hammered metal. Not the later "production cars" that had the small dies to press the metal. Any Cord is NOT made in huge multi ton press applications. They were many pieces to make a Cord body. Just the fenders are either 2 or three pieces welded by hand together. Then filed to smoothness. Look under and front fender. See the gas welded seam. The convertible Cord had different doors. They were taller and longer as I recall. Only two doors were ever made for the sedans. The right front door was cut to fit the left rear door. Same with the other side... Early production is just that.. They were made on a small assembly line from a store of parts available at that day. Thats why cars made close in line had different pieces installed. Auburn was not paying the suppliers so they had to find a new supplier to buy from and then not paying that supplier too. It was a tuff time for the company financially. After the end of 1936 Cords that were not sold got a new serial number plate saying it was now a 1937 Cord. This name was "renumbered Cord Cars"..... My particular 1937 Cord Beverly sedan has a build date of 1-6 to 1-8 1937 so my car is a 1937 car. It is not a renumbered car. The last Cord was made around July 1937 as I recall.. If what Jim has recently posted is correct that makes my suggestion this was a hand built but I was wrong. It is not a hand built so parts will be easier to find and install.. Even not being a hand built this is still a car of desire for many collectors. It needs to work but the pieces needed are available for the group. The offered price seems fair too. I have seen worse rusted out Cord cars brought back from the scrappers too.
Gary Parsons
Al, There are numerous differences between the early and late cars (not talking about the handbuilt Cords). Almost every part changed during the two year production run. All the changes were "running changes". The only thing that changed at the Model change was the serial number plate.
Some of the more notable changes that people look at are - steering wheels (smooth vs ribbed), standard vs supercharged engines, Chrome vs cad under the hood, cowl fillers vs cowl vent, fast back vs bustle back Beverly, brass vs pot metal windshields on the convertibles, even the convertibles came along latter in production.
Gary - THIS IS A PRODUCTION CAR! The serial number clearly shows this. Production started with serial number 810 1101. This car is serial number 810 1189A which would make it the 89th Cord built on the production line. Not a hand built!
Jim
I have been told by numerous people in America it is not practical anymore to restore Cord sedans as there in NO profit in it.
A guy here in Australia who has been sitting on an unrestored supercharged Custom Beverly for over 20 years told me he has bought a phaeton body at an auction in the US and will strip the Custom Beverly to build up a supercharged phaeton. HIs choice .............................. certainly NOT mine.
The supercharged Custom Beverly was a rust free original car that had been Certified by Paul Bryant.
I just wonder were we are all going?
The ACD Club promotes the statement "An organization for the restoration and preservation of original Auburn, Cord and Duesenberg automobiles".

Terry CockerellJan 28, 2026 I have been told by numerous people in America it is not practical anymore to restore Cord sedans as there in NO profit in it.
A guy here in Australia who has been sitting on an unrestored supercharged Custom Beverly for over 20 years told me he has bought a phaeton body at an auction in the US and will strip the Custom Beverly to build up a supercharged phaeton. HIs choice .............................. certainly NOT mine.
The supercharged Custom Beverly was a rust free original car that had been Certified by Paul Bryant.
I just wonder were we are all going?
The ACD Club promotes the statement "An organization for the restoration and preservation of original Auburn, Cord and Duesenberg automobiles".
Terry, that is a crime.
Terry CockerellJan 28, 2026 I have been told by numerous people in America it is not practical anymore to restore Cord sedans as there in NO profit in it.
Was it ever profitable???
alsancleJan 28, 2026 Terry, that is a crime.
Yes I agree it sure is a crime. Recently watching a YouTube film about the ACD Factory in Oklahoma, Doug Pray did a walk around the bone yard giving a talk on the various cars in field storage. One was a Custom Beverly that had been stripped. Doug pointed it out the body was very in good condition and that the car should be revived ......................... another crime.
As to the profitability. Paul Bryant came up with the Certification system to stop crooks taking advantage of unsuspecting buyers.
Regarding the statement "Restoring Cord sedans is not profitable these days" I'm just repeating what others have told me.
I love my Westchester, it is a beautiful looking car. The rag tops are nice too but honestly less practical.
I really hate the work done destroying sedans to keep the convertibles on the road.
I understand what you're saying. And my point really wasn't directed just at sedans. Has it ever been profitable to restore any car (professionally), other than a certain few? It's hard enough to break even, even if you do the work yourself and pay yourself nothing.
Restoring my Westchester I did just about everything I could apart from the body work and painting of it. The cost of buying the car and shipping it to Australia was quite significant. We have to pay 10% tax on the import and more above a certain value. Any parts needed shipped from the US end up being twice the price.
About a year ago in the ACD Club newsletter there was a story on a couple in America who bought a reasonably good Cord phaeton from a museum sale. Before the restoration was started the car was driven so that it could be evaluated mechanically. It was found to be pretty good. They then proceeded to spend over $800,000 US on a complete restoration which took over 5,000 hours. The couple were still able to smile for the photo shoot.
They should have been locked up for their own safety.
Doug Pray at the ACD Factory in Oklahoma in one You Tube film spoke of the restoration of a Cord phaeton nominally taking 3,500 hours.
I figure if I was to break even when selling the car one day I would be fortunate ............................. but then TOO old to enjoy spending the cash!ƒÿì
I have purchased (4) Cord body shells in the last 20 years that were parted out rather than restored. I have rebuilt 3 out of 4 of the cars back to nice driver cars. I spent years searching out parts to put these back together. Many times I could not the parts or they were ungodly price, I began making parts. I have done all the metal work, paint, mechanical, and stitched up new wool broadcloth interiors. Each car get better as I have learned to things better and quicker. Having retired some years ago, i am able to do more work. I think of it as a labor of love. My kids all have Cords now and enjoy them. I feel confident that my children and grandchildren will enjoy my work in the long term. Many of our fellow club members have not been fortunate to have kids that want to own and enjoy our classics. No, it not a profit aspect, it's about the cars and fellow club members.


Hi Pat. I didn't realize you had built the cars up collecting parts. That's not feasible in Australia. I imported a Cord that was essentially complete but run down mechanically. You are to be congratulated for your efforts. Josh Malks would have been delighted with your work.
America is the place for Cords and Indiana even better. My son is not mechanically minded and would not know what to do if anything went wrong with it.
I agree it becomes a labor of love and what a romance it has been over the past 19 years.
Owning an Auburn or a Cord in Indiana is patriotic.
We will be celebrating our Cord's 90th Birthday in mid April. From production figures 810 - 1586 A appears to have come off the line in mid April.
As to the cost of parts being excessive, Oklahoma has a Cord sedan radio bezel for sale at $500 US. I would consider hand shaping one but luckily I don't need it.
I put an advertisement in the Forums for a UK member Tony Halton who needs a set of Westchester bumper support arms, but sadly NO replies.
It is next to impossible to get the parts you need if you are in a foreign country.
Around the world there are people like us who just love Cords and the whole Auburn Automobile Company story.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
