It seems you have developed a loose connection .................. somewhere.It may be up front on the gear box, the gear change switch or somewhere in between. It will be a step by step process of elimination. Attached are copies of the pages you requested.There is a booklet on the gear box available from the Museum in Auburn. 

Your issue is not uncommon. Jim's article is gold and must be studied. There are also some threads on here that you should probably read front to back. This is one:
 
Hi Sarah, Congratulations on your "new" Cord. First I would look at the cross shift and see if when you put the selector switch in 4th gear does the cross shift move to the right? If the cross shift doen't move check the power at the solenoid. if not the problem is up in the selector switch.
 
If the cross shift does move, check the #5 wire on the cross shift switch and see if there is power there. If there is no pwer then you need to adjust the switch. If there is power check the solenoid. Sorry I don't have my wiring diagram with me so I don't remember whcih wires on the solenoid bank.
 
This will isolate where your problem is. Good luch and let us know how you make out. I guess I should ask do you have the shift wiring diagrapham?
Jim
Hi Paul, there should still be available a book on the gear box from the Museum in Auburn. It was written by Sid Ayres. It is also being currently updated and reprinted. Jim O'Brien would be the best contact for the new book.
Jim's new email address is
ob7879@outlook.com
Sarah, have a look at Page 2 of the Gear Selector Switch Wiring topic.
Towards the bottom of the page are some good pictures.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.



