I have just had mine re-lined , 11" drum and 3/16" shoe thickness I recall. Hopefully some one will confirm.
T
· Feb 13, 2021
On the subject of brake drums it is a good idea to have them balanced.With the use of a wheel balancing machine it can be done very accurately.One of my drums was ok the other three were way out. The worst was out by 120 grams.
G
· Feb 14, 2021
Maximum oversize is 0.060 ".
M
· Feb 14, 2021
I have seen brake drums machined so thin that the outer dia. of the drum broke off from the hub part of the drum . Also I have seen a brake adjuster come loose inside a Auburn drum and actually puncture the drum. Neither of these were 810/12 Cords though. Just precautions.
CORDiallyMike
J
· Feb 16, 2021
Saw a Franklin in a 1929 that the owner was complaining brakes grabbed something awful - when we were all diagnosing it someone put on the brakes and you could see the drum flex - someone did not understand that you cannot just turn the drums down to nothing. I had a similar situation on the 1935 Packard Twelve on one rear drum (unfortunately also a drum hard to come by and a year went into the search).
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.