You will require a low pressure 6 volt pump placed close to the fuel tank. This can be fitted under the floor where it is raised up to clear the rear axle. You will also need an in line filter. I will have to check what brand of pump I have and post some pictures.
T
· May 13, 2022
Sorry I can't find any pictures of the installation.
The pump I used was a low pressure Airtex.
M
· May 13, 2022
I have this set up, works a treat, use a sneaky switch under the dash to use it when required. If the manual pump should fail you have a back up too.
M
· May 17, 2022
Everyone should be aware that Airtex has not made fuel pumps for 2 or 3 years. The pumps you see on the internet advertised as "Airtex" are not! The picture you see in these adds is not the pump you get in reality.
CORDially Mike
T
· May 17, 2022
Thanks Mike, no wonder I had trouble trying to find the company on the Internet.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.