SPOT ON
Perfect except for the wrong screw/sleeve bolt to hold the cover on.
You have the '36 and early '37 Crosley radio.
The late '37 has the chrome center etc but is a totally different radio made by Philco.
Hi Pete, Everyone can be assured that you are giving them 100% accurate information. Missed you at the Can AM Meet. Did you think about swimming across the river? We would have dried you off and taken you to the meet. Hope they agree to letting you Canadians come over to the Auburn Meet. You are such nice people.
Yours truly, Big T (as wee Bobby called me)
I recall purchased this Cord decal from Stan in the past. I saw it missing on the radio in question but was not sure if I should mention it.
 
 
Gary Parsons
The convertible radio case looks to have better cooling than the sedan radio with the louvers across the top. A series of ventilation holes were drilled at the back of my sedan radio case that should do the job and are basically invisible.They are located above the original thick cardboard spacer placed between the radio and firewall.A couple of radio technicians advised me to improve the cooling. 
An electronic vibrator was fitted by a radio technician. The radio was operated on the bench and worked ok. I have not tried it in the car simply because the restoration is not finished and I have no 6 volt power supply yet.
I don't plan on driving the car in the rain but take on board your comments on leaking cowl vents.
I placed a piece of rubber over the top of my Auburn radio to keep rain coming in the cowl vent from getting on the radio. You don't think you will drive in the rain Terry, but I will practically guarantee it will happened if you drive like most owners in Australia.
CORDiallyMike
Mike it won't be intentional but I know it will happen eventually as it did in the past. A suitable cover or water deflector as you suggested will be the way to go.
At least I won't have to worry about trying to set up a "rag top " in a hurry on my own!
Did the oil and water filler spouts that sat above the radio tuner offer some drip protection, it seems the engineers would have overlooked this bit of weather proofing.
When I get my test bench built, power supply, soldering and test equipment ready, I plan to try to trouble shoot my radio leaving as much original as possible. I have learned a little over the years and with YouTube this video would be a good walkthrough as this is a very similar radio to Crosley or Philco. It is obvious it is a very time consuming process $$$$=time but worthy for an historical museum relic Cord.
I have several hood hinge drain pans. One of them has two drain hose nipples on it. I believe that pan fits the passenger side and is specifically for the 36 cars with the cowl oil n water fillers in it. I may even have three complete sets of pans but would need to search for sure.
 
 
Gary Parsons
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.



