Welcome to the fun of Cord Restoration. This is the best place for correct information too. Please tell the forum what the car actually is. Try NOT to change a non supercharged car into a supercharged car. It will loose value doing so. Pick a color that is correct for this car too. Same with interior color and material. I believe every convertible had leather interior but may be not sure. I know sedans came both leather and cloth. But once again for a little more money you could get "what you wanted" from the factory.
Many times if you post the car serial numbers and the rest of the identification tag information this forum can tell you all kinds of history on your car.Its amazing to learn things too about who owned you r car in the distant past.
One final note. Do not throw anything away during restoration. Just a simple radiator cap is about $300.00 today.... If you can find one. And most owners have no idea our caps seal internally unlike modern day caps seal on the outside of the neck. Personally I like to take pictures of everything before and as I'm restoring anything on my Cord. I'm a retired machinist and learned to document everything as found and as left when done.
As for value of parts or complete engines usually its much more profitable selling by piece. I would be interested in the lot of parts you purchased in Detroit. If you want we can email each other as to what I need or what you might be willing to sell or trade for some of my extra parts. Hopefully you have the original Autolite generator GCO4804-A. If not you looking at around $2700.00 and up from there.... I have a huge shop book of every Autolite generator from nearly every car from the teens to about the late 1950s.... So If I have the numbers I can at least tell you what it came from.
 
 
Gary Parsons
History of the car as I know it. My father bought the car in 1987 form doctor Smith in Ohio. It was verified then that the engine had been rebuilt 2 yrs before and the car only had 2500 miles since then. the cost then was about $30,000. The Transmission had been done 10 years before that in Toronto. The tranny has always worked fine except for some electrical issues that were cleared up when I installed a new harness from Howell in 96. In 97 I drove the car from Pgh to Auburn for the annual meet, top down all the way. While I was there I had the member from the club (I think he was a professor at Indiana University) go over the car to verify it is an original Cord. At the time he told me the serial number plate had the wrong serial number and that the number was for a custom Beverly. The number is 310258S. Our title has that serial number and says 37 Cord Phaeton. He then checked the frame and said the frame number was 1441 or 1442 I can't remember but I can check it. He told me that the serial number should be PH1441. This is something I hope to get cleared up in the future during the restoration.
 
After Auburn I drove to Hershey for the AACA meet and on the trip I noticed a tick in the engine so when I got home I decided to start a restoration on the car. A piston towards the fire wall had cracked and scored the wall so I knew I needed to redo the engine at that time I figured I would do a complete restoration. I tore into it but at the time with 3 kids and other matters it stalled and just sat. I now have the time and money to get back to it.
 
Particulars about the car: It was converted to 12 volt at some point. I think it was done when the engine was rebuilt. The car has the cut out for the emergency brake cable in the rear and not the notch but it has benedict's brakes. This indicates that it is a 36 body but it has a lot of 37 parts on it. It has the outside exhaust and the 150 MPH speedo. At the time it was checked out in Auburn the gentlemen checking said it would be easy to convert this car to a SC car because of the items I mentioned. Also at the time he verified it as an original Cord.
 
Side Note: when my father past he had 6 Conv that were divided between my 2 brothers and myself. 37 Cord Phaeton, 49 Cadi Conv, 60 Eldorado Conv, 61 T-Bird Conv, 68 Imperial Conv, and 77 Mercedes 450SL conv. I have the Cord and the Imperial. Also if any body is interested the 61 T-bird is for sale. It is all original and a real nice survivor, it is listed in Hemmings and the AACA web site.
AGREED: IF THE CAR WAS UNSUPERCHARGED WHEN IT LEFT THE FACTORY THEN LEAVE IT THAT WAY !!! It use to be the cars were worth more money - now the cars get a thumbs down and a nose snub. Supercharging is also incredibly difficult to rebuild and maintain and I know very few supercharged cars that are successful tour cars. Basically, supercharging sounds really neat, but has serious downsides.
 
The aforementioned said: If you like the external pipes then install the pipes (that still seems to be an acceptable compromise).
"At the time it was checked out in Auburn the gentlemen checking said it would be easy to convert this car to a SC car because of the items I mentioned. Also at the time he verified it as an original Cord."
 
Opinion = Possibly really bad advice !!!
I am grateful for the comments and advice but I'm not even sure that it is the original engine in the car. The serial plate list the engine as FC3227 and the engine in the car is a FB number. As for whether it increases the value or hurts doesn't really matter to me because it more than likely won't be for sale in the 20 or so years. Hine sight is 20/20 but who can say what any of these cars are worth 20 years from now when they get out lawed to be on the highway. LOL
 
Now reliability is something that I am interested in. I do plan to drive this car and not just Sunday drives or as a daily driver but I do plan to enjoy it and put some miles on it. I would even drive it to Auburn for the meet when it gets done, which is just over 300 miles for me. I would hope that if done correctly this car will preform as good as any car its age and be able to travel reasonable distance without major hiccups every time. I have been flat bedded home a few times even when it was running. LOL Sometimes the journey is better than the trip. I have always relied on the kindness of strangers. 🙂
Reliability is certainly desirable. I have driven my 810 sedan on a few 1,300 mile round trips here in Australia without any problems. A lot of work had to be done to get it into that condition. I covered around 10,000 miles in 5 years then decided to completely restore it properly.
One advantage to having the supercharged exhaust system on a standard engine is that it helps to keep things cooler under the hood as the hot air can pass through the screens.
A fan shroud is also desirable for heavy traffic conditions ........... good insurance on the investment.
Whatever the serial number on the cowl says then that is what you want - if originally an S/C car then put in an S/C engine and is originally a non-S/C car then go with the standard engine. As to S/C exhaust on a non-S/C car - have at it and enjoy.
 
There are good reason why a supercharge rebuild are 20K +
 
And, I see very few S/C cars successfully toured with (like in really driven any distance for any time). There are great people that tell you at ACD meets that their cars are runners - well ,they trailer them to and from Auburn and put 75 miles on them once a week each year - that is not really a great tour car. I for example drive to and from Auburn and clock in at just over 700 miles for a week of driving (and we put on another 500 to 1000 per year - just depends). I do not mind S/C cars but realize they give people fits in restoration and driveability. The fellow who restored my car drove his Sportman from Washington to Auburn - he just really never mentioned his guts of his S/C were empty - he reinstalled everything to sell (and it set a record price).
I know of a member that got a GREAT DEAL on a supercharged Cord. It was terrible to drive on the streets in stop n go traffic but... On freeway driving it was fine. It turns out his GREAT DEAL WAS BECAUSE THE SUPERCHARGER WAS GUTTED. City driving the fuel would drop out of the air fuel mix and puddle causing a over rich fuel intake. So always do a good investigation before purchase. When you "find" a rebuilt supercharger its going to cost nearly $25,000.00. Just the Stromberg AA25 carburator will cost $2500.00 too.
Restoring these cars can be such an interesting adventure
 
 
Gary Parsons
Gary, There are a lot more of those "gutted" superchargers out there then most people realize. The gas mileage does go down considerably when they are gutted. Bob McEwan used to get 12 MPG with his Cord while I was getting 17 MPG driving my cord right behind him.
 
I have to agree with Jack, a S/C Cord can be a good tour car. It has to be restored and sorted out properly (like any other Cord). Brad has driven his S/C Cabriolet from OK to Auburn many times as well as many others.
 
John is right that many owners don't drive them any more on the open road and as a result they don't work as well as they should. For many the supercharger is just a very expensive "pretty" item on the Cord. It is expensive to rebuild, expensive when something goes wrong and is one more thing to deal with, all for the sake of outside exhaust pipes. There are a lot of Cords out there that have superchargers that haven't given the owners any problems.

Thanks for all the replies and trying to make me rethink my current situation. With that said I am glad there were a few post that said a SC engine can be reliable. Here is my situation at the moment. the parts I purchased from Detroit came with a SC block that has been sleeved and the water jacket repaired by stone barn. It has the crank with new bearing, Cam with new bearing, Fly wheel, both pulleys at the ends, rods with new bearing, SC intake with impeller and carb, and the generator. It also has new lifters that have been ground. It is missing some of the internals such as the rods that holds the lifters in but I have all of that with spacers and springs between, on my current engine. It does not have the gears for the oil pump or distributor but again I have all that in my engine. I also have the distributor that can be set up for the SC engine. The one thing I haven't found is what runs the impeller off the cam. I need to find out how that works and what I am missing and can it be found or reproduced to make everything work. If someone has a diagram of that portion of the SC or a cut away of SC engine I would be very happy to see it. I haven't started anything major at this time but will be working on it soon and through the winter.
 
Robert Hauser
Hello ,
may be able to help with pictures and parts.
mmsfld@aol.com
While not a Cord. I have put many miles' on a supercharged Auburn with no reliability problems.
CORDiallyMike
Mike, you are the only truly successful S/C Auburn owner that I am aware of. There are a handful of others who have done the work and their cars may or may not be truly roadworthy, And there are a lot of people that I would say their car capable of local driving. And there are a group that claim their cars are, but ....
 
As to 851/852 cars, there are only a "slim" handful that have 10K, 20K, 30K, 40K, or 40K plus miles on the clock post restoration and that are always continually worked on to keep them roadworthy to basically do any sort of driving and at any time (Mike has one of those cars, we have one of those cars, and ....).
 
Don Wholend restored my Auburn and put almost 40K miles on it touring and Don also had a Supercharged Sportsman (which he drove the same way) and I do not recall him saying many kind words about supercharging other than he was happy with the sale price. Every time I looked at an S/C car he was quick to say to gut it out and restore it for the bench to reinstall everything when it comes time to sell.
 
I do give Brad credit for driving his Sportsman, though in 2019, it came to ACD Festival on a trailer for whatever reason.

John,What exactly is the issue with an SC car over a regular one? I asked my dad if he had all the components in his blower and he got mad at me like it was a stupid question. His car has about 7k miles on it since it was restored in the mid 60s, most of those miles in the first 10 years, but it never broke down. Two trips from Boston to Auburn down I80.
I'm NOT an expert on the superchargers but... I believe the issue is the clutch wears out. The impeller spins 6 times engine rpm and MUST have a clutch that can slip when you run high rpm and ask for a shift to another gear. All this spinning enertia needs to go somewhere so "things" don't break or gears strip teeth. The "clutch" is tight metal rollers contacting a central shaft. I believe Ron Monte has one for sale on ebay in the Auburn section. Its an interesting design for 1930S...
 
 
Gary Parsons
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.

