My radio looks just like you picture. Thanks for the model number.
Scott
I just realized the sliding switch was a tone switch as in the old diagram you posted, of course, the tone switch would be in the center rheostat in the overhead speaker in the 255.
I remember the cooling louvers were good for letting rainwater out as it was installed under the wind vent, maybe not be a concern on the handbuilt with the filler neck.
Also, notice on the old drawing that the power wire to the control head has a jumper clip. I have seen this on other period drawings. I think they were afraid of shorts and overheating and a quick way to disconnect in an emergency.
These radios were newfangled things and misunderstood, even today they are complicated. when they worked they worked well but not as reliable as modern radios. My dad born in 1911 always bought cars with a radio delete plate.
I always thought the small round silver radio medallion was made like the cloisonn├® emblems on the front of the hood and taillight medallions were. They are fragile glued-on aluminum stickers, no wonder they are always missing.This is a Philco from 1937. If any 80-year-old underdash radio is used I am impressed.┬á
Jim Obrien see PM.
Russ
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
























