They REQUIRE the ring. As far as the black Cord picture goes.... The brackets and the lens are wrong. But they do look nice. Fog King driving lights are a speciality item in themselves. The lens retainer must be held together with a special fastener unlike most double nut n bolt fastener with removable attachments on each end. Then the bucket must have the back end flat. Not bullet shaped. On top of the bucket where the Fog King name tag is it needs to have the name tag telling us its Cord. Many times the bucket needs to have the letters sanded out for the tag to look correctly applied. The tag can't cover the imprinted name on the bucket.The lens must have the off white ring and might be able to be painted on.Otherwise its a factory thing.Now finally the brackets. They must be painted black and made from cast iron. How a judge can determine cast iron from steel is beyond me. But I believe judging is trying to eliminate the aluminum or non ferrous materials that have been made in the past. I prefer the chrome mounting brackets because it gives a classier finished look.Please anyone reading my post correct anything I have said. My information comes from well known club members and some widely respected judges. Its a matter of taste.Only a judge or a purist that can know whats correct.
Finally one last word on lens. There are several shades to pick from.So please buy a lens that matches what you have. Nothing in my opinion looks worse that two different shade lens or one is plastic and the other actual glass.
 
 
Gary Parsons
Gary the "Black Cord" is the hard topped coupe built by Bob McEwan in the mid 1970s. I don't think the brackets are "wrong" they are the correct shape, but just not painted black.
I don't think the judges would be splitting hairs over what material the brackets were cast in just as long as they are the correct shape.
Terry... The painted black brackets was told to me by Pete Kelly. I asked Brad Waken to confirm and he did confirm they are correct IF they are painted black. So far I have found two different types of these rare brackets. Jim Obrien mentioned he thought they were and Auburn part and had a part number cast into the inside of them.One more item I forgot to post yesterday was the actual lens mounting ring. Its a very specific narrow retainer ring. I recall seeing three or four different rings on these lights.
 
 
Gary Parsons
Thanks Pete Kelly. In the box originals.. Nothing better. I noticed yours have the fluted reflectors that makes the lens look fluted. I had someone show me the ultra rare fluted lens Fog King lights. I knew the difference but out of respect... Said nothing. I have a pair of both fluted and smooth reflectors.Not sure which ones I will use.
 
 
Gary Parsons
The photos are helpful. What will be most beneficial will be to have photographs of exactly what the judges are looking for. Is there anyone who has a set of Fog King lights that meet the judging standards that they could post?
John Meredith
John, I have asked this exact question TWICE on this and the judging forum. SAdly no answers. This ACD forum has only about 8% attendance at best per Randy Ema. I continue digging out bits of information from well respected club members but nobody has given"it all" to me...
 
 
Gary Parsons
John, unfortunately the judges are silent in the Forums instead of leading the way. Quite a few years ago there was a campaign started to give details of how specific areas should be detailed and presented. The main one that comes to mind is the "Fuel Filler Area." I think this was done by Mary Killeen and others.
It detailed all of the screws and nuts as well as the sleeve material, chain and spring clips. A perfect example showing how to do it correctly.
This is nonsense. Why do we have judging standards? We invest a lot of money, time, and effort into our ACD cars to restore them. Our actions and activities are all directed toward preserving history; a history that is unique and of value. Yet, we have to guess as to what is correct historically. I think it is time that judging standards are set down in detail (if there can be agreement) for those of us who are in the process of restoration. There are still a few of the older club members who know what is correct and incorrect when it comes to historical detail.
My Berline had fog lights on it when it rolled off the assembly line. The wiring holes are still present on the front body shell. How am I to correctly restore this rare Cord if I do not have a detailed judging standard for something as simple as the fog lights! I do not know what exactly I need in reference to these fog lights.
It is time for judges and all involved to provide the information we need to preserve the history our cars represent.
 
John T. Meredith, MD
This is a volunteer organization.
If anyone wants something, volunteer to head it up.
I just try to be helpful; if anyone wants fluted fog light reflectors I have a couple extra.
Pete
Regarding the way it should be....the answer is not that simple. These cars were hand built on an assembly line. There were at least two or three versions of everything and as they learned(or ran out of money) they changed. The judging stanadards are just what the judges will accept, not necessaryly they way the Cord came from the factory.
 
Regarding the fog lights they were dealer installed options. Auburn would sell the fog lights to the dealership. Some dealerships would buy fog lights from other sources and install them on new Cord - this would save them a couple of dollars. Also each dealership would install them their own way so there is no one way to run the wires, locate the switch, etc.
 
If you really want to know what is correct for your car start doing research. You can start with the engineering change notes, find original factory photos or early photos. Take a very good look at the few original cars that are left. I know you will have a lot more time in doing the research then you will have in restoring your Cord!
Thanks for the explanation Jim. As to what I have researched from well known members is what I have contributed to this post. My information is very specific. Something nobody has mentioned yet is where their particular Fog King light was made. I don't think it needs to be in this but here it is for historical purposes. They were made in three different locations. Pete Kelly have an original box that says Chicago. I have seen some lights made here in Los Angeles. But most are made in Racine Wisconsin. Those are the most plentiful. Nobody wants to do this job twice because of cost n time spent. My idea is do it once and do it right. We all know how our Cords were put together on a shoestring assembly line by a broke company. Heaters are another touchy item because some say their car came off the assembly line with a heater. But when the factory stopped paying for parts received they stopped getting parts and had to source other suppliers willing to take a chance. You once said on this forum all Cords are the same but they are all different. Nuts n bolts run low on the assembly line to substitutes were used. How exactly any car was able to drive off the line can be different from the car in front of it or behind it. Overall the factory did a fine job getting these cars "finished".
 
 
Gary Parsons
"The judging standards are just what the judges will accept, not necessaryly the way the Cords came from the factory". That's quite a statement Jim.
I was under the "illusion" that the new revised judging standards concentrated on exactly how the cars left the factory apart from accesories that were fitted by the dealers.
As I used to tell L-29 owners who ask trunk questions for judging, if you don't have fog lights, heaters, compasses, you don't have to worry about what is correct! They are not required for judging but are accessories. Just a thought.
CORDially MIke
Thank you Mike.... Some of us what and like Fog King lights. This is why many of us in this post are seaking the "correct" way these lights are supposed to be. I'm very well versed in the correct spark plug and grit my teeth when I see the Cad plated bodies. My years of spark plug research and collecting have blessed me with many two ring Champion H10 and the dark body H10 with 5 rings.
 
 
Gary Parsons
To All,
This is a good discussion. I think that what might help all of us is to have more photos of the accessories and what is "correct". Would it be possible to in some fashion connect photographs of what is correct with what the judging standards are? I'm willing to help with this. Possibly we could start a new thread regarding photographs of accessories. Or, may be we can develop a new file on judging standards that is linked to photographs of "correct" standards. I do think there was a degree of variation coming off the assembly line and I do think the onus is on each of us to do the research regarding a particular feature of our Cords. Sorry if I came across frustrated in one of my posts. I am just trying to sort through what has been added and what is "correct" on my Berline. There are some unique items on this Cord, like chrome glove box doors and window sills. The family is strongly certain that these were present when the Cord was purchased. Do I keep them or put them back to "standard/correct"? I may never know what or how this Berline actually looked when first sold. This is part of the mystery of Cord automobiles.
Hope this helps and adds to our discussion.
Cheers,
John M.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.






