Be patient. The two clips on the door ferrule can break very easily. This is what I have done which may or may not be the best way. Start by spraying WD40 or some other penetrating oil both on the tabs thru the 2 access holes in door. I then jiggle the handle up and down slightly to make sure the ferrule is loose in the door hole opening. Then make sure the tabs on the ferrule have 1 tab to the top and the other on the bottom. I then use a Philip screw driver and start with the lower hole and try to depress or push in the lower tab while at the same time put upward pressure on the handle from the outside. Then go to top hole with screw driver and pry down on top tab while putting downward pressure on the handle from outside. Repeat as necessary till the handle pops out
W
· Mar 31, 2021
Tthank you thank you! Your suggestion worked like a charm!
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.