Can't remove interior door latch handle and window crank handle after removing t
Feb 15, 2020·1K views
Replies (3)
S
· Feb 17, 2020
put a tiny bit of 3in1 oil in the pin holes. if your interior is nice it could be a challenge not to get oil on the fabric. wait a day or two. then wiggle handles up and down while pulling. for more leverage, wrap some cloth around handle then gently clamp on a vice grip ....wiggle & pull.
W
· Feb 17, 2020
Thanx!
After an additional 2 hours+ I got it off . Had to destroy the escutcheon to get the crank off but they are relatively cheap, if you shop around
T
· Feb 25, 2020
This is a copy of directions sent along with the locking part made by Henry PortzI'm posting this from George van Nostrand