In my experience of owning and driving Cords for the last 49 years, I really question sill plates being highly polished originally
from the factory. In today's world of overly restored cars, I agree that they do look better highly polished but my experience tells me that
they were originally just bright natural aluminum finish for both the sedans and convertibles....
Well that is certainly encouraging. I may be able to get a bright finish on them.
Many thanks, Billy Bassoon
Alas , now that I have the sills off I find they are really almost dent free. What I have 82 year old aluminium with deep corrosion pits. I tried to gently scrape the black out off a couple pits with a dental tool. One when right through the metal. No more of that! Some places look as though they were worked and in those places the metal is kinda crisp. After polishing two I find they look a lot better...it's just the remaining faults are more obvious. There is an added plus. Having loosened up the front seat I've found some upholstery issues I can easily fix!
Thanx, Billy Bassoon
Am not able to respond to how shiny but can suggest mixing or experimenting with silver paint to fill in the pits or to color the black stuff. A high gloss lacquer may be all you need.
 
 
Gary Parsons
Thanx, John.
I have a set of either unfinished phaeton or cabriolet sills, not sure which, that I'll experiment on.
My best advice would be to sand with perhaps 2000 grit sandpaper - wet' date=' and then hand polish with such as Mother's Mag/Aluminum wheel polish - AGAIN BY HAND. And, I would be happy with the end result as it sure beats someone warping them up with a buffer or ... Also, you can always do some test spots on the backside to figure out your technique.[/quote'] 
They above advice is very sound. You might try Semichrome polish in the tube. Only place I could purchase it was ebay but glad I did. It really restored my instrument gauge bezels nicely. 
 
Gary Parsons
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.


