I too reused the original leather seals and worked leather conditioner into them. The leather conditioner I used is called Dubbin and is very greasy. I believe that the shift cylinder is too big consequently the gear are subjected to too much force.
Flow restrictors are required to be fitted to both ends of the cylinder . George Arakelian pioneered this modification.
Forget quick gear changes. The main concern is protecting the gearbox an d saving it from damage.
When I had my Cord on the road I held the clutch pedal flat on the floor for two seconds each time I changed gears.
Having flow restrictors reduced the shock loading as the main cylinder is really too big for the job.
I found that I had to have the flow restrictors almost fully closed . It is a good modification to do.
I also fitted micro switches to first and reverse gears that let you know when the gears have been selected properly by small lights under the dash. That basically eliminated accidental gear crunching. It all worked very well.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
