Hi Terry.
In that era, those noise suppressor capacitors were almost always 0.5 MFD. I have occasionally seen 0.25 and 1.0 MFD ones. The exact value is not critical. With modern parts in would be easier to find 0.47 MFD capacitors. This is a low voltage application but any parts should be tolerant of engine compartment temperatures. You can still get this style of capacitors (bolt-on metal housing) from auto parts distributors.
Mark
Thanks Mark for the detailed description. I guess that covers the Coil and Generator.
What is used for the Distributor Suppressor?
In the diagram below it is connected to the main wire from the Coil.
 
Auto parts stores in Australia are not as well stocked as those in the US, however I should be able to find the capacitors you listed.
Thanks,
Terry
Those were no more than in-line resistors - typically 10,000 to 20,000 Ohms to help suppress voltage transients. If you are using 'modern' resistive or designed-in inductance (spiral wound) spark plug wires they would accomplish the same thing.
Are you trying for something period accurate or are you actually trying to suppress electrical interference you are hearing in your radio (or both)?
Hi Mark.
To be honest I'm trying to be prepared for what to do.
The radio has been working on a test bench with a modern electronic vibrator. I have not powered it up in the car yet.
After seeing the three items listed in the installation booklet, I wanted to follow up exactly what they were first.
I am trying to keep it looking original as well as making it functional. Check out my recent articles in the Picture Gallery of the Forums.
I have just basic standard type spark plugs in the engine,
Hi Mark.
After a lot of trials and tribulations the radio is working like a charm .................... loud and clear.
Thanks for your help. The job was put on the back burner for quite a while with other things taking priority.
The AM stations here are limited but it's great to hear it working.
Glad to hear it!
Which suppression methods did you find necessary to employ?
 
Mark
Hi Mark.
I was able to purchase some metal capacitors 0.5 MFD and some Bakelite inline resistors with 15000 Ohms from an elderly guy who repairs old radios. The items were the last he had in stock.
 
Where are you located?
My email address is .......... tandgc@outlook.com
I know Ray Foster, Bill Hummel and Albert Ramos. They all live in Texas.
Oddly my email address was hidden in the previous reply.
My contact details are in the Directory. I live in Australia.
I would appreciate you contacting me for nothing in particular but just to make contact.
Thanks,
Terry
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
