TE
@Terry Cockerell
Replies (6)
1
Terry what brake fluid are you using? Not sure what the standard master cylinder clearance is supposed to be. I realize the cup stays under a small amount of pressure at all times to help keep the cup open to the bore. Hopefully someone with more information will chime in. Car looks gorgeous.
 
 
Gary Parsons
C
Are you using silicone brake fluid ?
T
Thanks Gary and Curt, no I am not using silicone, I'm using DOT 4 brake fluid.
I tried silicone brake fluid and gave up on it. Everything was cleaned properly before using the DOT 4.
C
Well then, either the mating surfaces are not flush, the washer is bad or the threads are comprimised. I am unsure what kind of thread locker can be used in that situation.
C
On an Auburn , the stop light switch is at the front, that is where I thought in tas leaking.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.

.jpg.cc09ca46495c07a831198727e4732853.webp)