Terry this is an interesting observation and fix. Am impressed. Something I surely will be watching for when I reach this part.
 
 
Gary Parsons
It looks like the arm the brake pedal attaches too needs to be turned around.
Pedal should now line up better as well.
Pete
The reference point on the main arm in the pictures is the lug where the return spring attaches. This faces the firewall. It can be clearly seen in Pete Kelly's first and second pictures.Now check my pictures taken while dismantling the car and this morning.I placed some white paper towel behind the arm so the the lug which is also facing the firewall can clearly be seen.As previously mentioned it had been that way and probably since day one.
Good pics Terry. Where did you purchase the master cylinder rod rubber bellows?
 
 
Gary Parsons
Hi Gary, I bought it as well as other brake parts from a clutch and brake specialist repair shop.
One other point, in my last posting in the second picture you can see the brace between the pivot shaft and the master cylinder. This had been out of adjustment for many years as a deep groove had been worn in the end of the shaft. To compliment a new shaft I made a new brace with a bush. This needs to be carefully fitted so that the shaft is not pre-loaded. It also needs to be painted.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.






