Terry mine is the Philco radio. If it might help I can post pics of the cable you may want to see.
 
 
Gary Parsons
Hi Gary.
Yes, thanks that would be a step in the right direction.
Cheers,
Terry
Hi Tom and all
This is a real CORD open car Crosley radio; top connections are power and antenna.
Pete
I have been slowly reinventing the wheel. I have been dealing with Rhode Island Wiring Services as they offer an aerial cable for Cords. Sadly they do not offer the other cables as they have not made any before now. I made a drawing of the speaker cable and had the speaker end pins as the radio had been removed with the bottom half of that cable before I got the car. George Van Nostrand came to the rescue with the three pin plug. Looking at the top of your phaeton Crosley radio Tom the sockets are the same as mine. The aerial cable has two pins while the power cable has only one.
As radios were fitted by the dealers it is a wonder the Judging Standards accept them as they were not fitted when they left the Factory .................................... I guess we all have to allow some latitude.
Thanks for your contributions.
Regards,
Terry
Terry wrote the quote below
"As radios were fitted by the dealers it is a wonder the Judging Standards accept them as they were not fitted when they left the Factory .................................... I guess we all have to allow some latitude."
Now read his latest post from the Teefy-Seltz price guide in his reply to "810 1704A arrived at new home "
Pete in a recent Newsletter I wrote about my Missing Radio and found that it did not have one when it was originally sold.
The key point being the holes in the rear cross member where the rear aerial brackets are fixed had not been drilled.
The car had a radio fitted later with a telescopic aerial. The Judging Standards stipulate "As the car left the Factory" is my interpretation. Obviously radios and heater are part of the majority of Cords.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.


















