Terry, I composed and attempted to send to you a response but when I pushed the Submit button below the system said I had to Login to send. In summary there was a change in the arch of the rear springs on Cord sedans effective with S#1945 in August of 1937. Your car is Serial #1586A and would have had the earlier spring installed. Never mind for now the different spring part numbers which I had in my aborted PM. It seems to me that spring arch would directly affect the tyre to fender clearance at 9 , 12 and 3 o'clock positions. The lateral adjustment of the rear axle side to side would also impact clearance of tyre to fender and inner body side under the fender. If you are using the 6.50 x 16 proper tyre size you should have no issues but those choosing to install radial or non-standard tyres have experience some clearance issues. Sorry my more detailed PM failed to go through but you get the idea. This information may do you absolutely no good and I hope someone with more knowledge in this matter will provide guidance. A penciled notation at Page 12 of the Cord Engineering Changes notebook indicates the later rear springs had 3/4" more arch. Good Luck.