The way they were safety wired if one came off it would also remove the other?
Cordially Mike
I don't know Mike. It was a wonderful surprise just to see them there when the lid was finally opened.
It seems strange that the caps were left in place so long ago. It would have been simpler just to throw them away. Who ever did the job may have been thinking about the future.
I intend to re-establish the cowl filler pipes but block them off internally.
 
Cheers,
Terry Cockerell
They may have been wired so they wouldn't be lost when removed. The thought may have been it is easy to lose one but if wired together you wouldn't lose both. Just a thought.
Pat
The holes were filled in simply because the nails originally driven in to hold the seal strip had dented the surface.
I intend using special stainless steel items that have a thread and nut but look like flat head nails when fitted. I will be drilling new holes and fit the nuts from inside the cowl.
Actually the rust and body repairs are just about completed so I hope to have the car painted soon. Then I can start to reassemble it all.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
