Hi George.
I don't know what wiring diagram you have.
In two different diagrams that I have it clearly shows the sliding switch in the central panel.
I opened up a copy of the original wiring diagram into zones to make it easier for a mechanical guy to follow as I'm not an electrician.
I'm having problems loading the coloured diagram but will follow up with this.
Coloured wiring diagram attached.


Terry I see the dash light switch in the diagram, my mistake. I connected my dash lights to the head light switch so they only come on at night. Also it is protected by the 20 amp fuse.
George
Hi George.
No problem, I was wondering what wiring diagram you had used.
I put a kill switch below the drive's seat.
A minor improvement would be to make the slide switch knobs out of aluminium bar with a steel or stainless steel thread.
The original style dash dimmer switch is fed from the ammeter terminal. This dimmer switch has an off position. I offer a replacement dimmer switch which should be wired to headlight switch so the dash lights are not on unless headlights are on. The original switch wired to ammeter can be left on and drain the battery.
Pat Leahy
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
