The number plate with the stripes on it can be moved up or down but very slightly. Tomorrow morning I may be able to post up some pictures because my temp gage is apart till from restoration.
 
 
Gary Parsons
Hi George after refitting the temperature gauge in "Our Cord" the red fluid was up on the scale at ambient temperature. I can't remember where I read this but the solution was to place the cylinder head probe in a container of boiling water and then leave it. The system restored itself with the red fluid eventually dropping back to the bottom of the scale.
The gauge has worked perfectly since starting the completely rebuilt engine recently.
Trevor sounds like you have a different problem as your gauge is in your car which you have been driving.
Mine had been out of the car for a number of years during the restoration and I had straightened out some tight bends in the line. George's car is another that has been under restoration.
Let's hear what you uncover.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
