here are a couple of photos of the philco model 827(i think). it would really be nice to have an area in the forums where there were photos of all the cord major parts for reference. the main photos on the internet are just of the cars exterior or perhaps the dash but, when one is trying to restore a cord those are of limited help. these do show up on ebay once in a while. also i've seen them in the acd newsletter for sale.
I don't have any pictures of a Crosley A-255 so I can't help out with the tone control knob. The A-455 has a simple slide switch for tone 'control' in the front lower right-hand corner of the box. Both the A-455 and A-255 have electrodynamic speakers.Curiously, the last A-455 I restored actually had a Crosley A-156 chassus inside. It was likely a quick swap-out repair back in the day.Attached are the tube layouts.
The radio looks like it is bad but it can be repaired quite easily. Speaker cones are replaceable and usually the tubes and components are still good. It's the wax capacitors that fail as they change value with age. They can be changed with modern parts. To me the big problem is they are not original, even if I am the only one who would ever open the case. Just like the cars wiring harness the wires are fabric. You could not accept vinyl as factory. There was this video and many others that show a method of stuffing the factory capacitor's for a original look. Thought it may be interesting.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.




