That is fantastic you are recreating these, I suppose the beaded panels and side seams, drain plug and fuel sender location are correct as well. In this humid gulf-coast air and the fuel additives in today's gas standard metal steel will not survive more than a few years. I would much prefer a similar steel as the original but it will have to be stainless steel to survive the millennia I hope my Cord will. Every tank I have in every tool or vehicle has rust and corroded plastic fittings. The cars with stainless are perfect, they do not grow the brown flaky rust and begin to perforate and leak creating a dangerous situation. Also a slightly heaver gauge steel with original beaded profiles would be preferred. My straps and felt belts seem to be OK.