Is this correct?
Pat Leahy
There are two versions of open car seat cushions. The later has less pleats (wider) then most of the others. Do not know where the change came in 37.
Also, the later cushion bottoms had a step down in the box spring vs, a flat bottom like most.
Pat that's a interesting parts book, is a copy available ? EL, see my springs below , I would guess I have earlier ones
EL Here are my old springs , I'm not seeing a stepdown ?
Hooter






Hooter, send me a PM with contact info and email and I will send you a memory stick with all of my Cord info. I have provide this at the Auburn swap meet for free. I have a 4" thick binder with info I have collected for years.
Pat Leahy
Pat sent email with info , I have one you your CV kits in my Westchester
Hooter
My renumbered 1937 phaeton has 10 2 " pleats on the front seat backs. They are original to the car. I believe my car was on the assembly line in 1937 because it has several of the 1937 features. It does not have leather upholstery. The original color of the car was cadet grey with the brown cloth backed leatherette as in the picture. (Not blue like it is "supposed" to be). It was probably a special order.
Tom

On the ÔÇ£step downÔÇØ cushions, I suggest putting a sheet of rubber over the battery, if battery exposed.
I know of a Cord fire caused by cushion contacting terminals on battery.
Somewhere I have details, Cord seats I did for the late Bill Pettit,copied from nice originals.



Very Nice David , I'm hoping mine comes out that nice
HooterMar 19, 2026 Very Nice David , I'm hoping mine comes out that nice
Thanks. Very time consuming, cotton stuffed, no foam. I never think foam looks correct, plus it disintegrates.
Show us pics when yours is done!
Cleaning the frame and springs is not fun. Worst yet is rebagging all those springs. I have done four cars (in wool) and this takes as long or longer than cutting, fitting, sewing and fitting the seats. Headliners in sedans are fun too. I had my first car done by a shop that did more antique furniture than cars and the work was not good. Bought a new walking foot sewing machine and starting doing my own work. Many shops can do the work, but few follow the details of the original Cord seats.
Pat Leahy


37beverlyMar 20, 2026 Cleaning the frame and springs is not fun. Worst yet is rebagging all those springs. I have done four cars (in wool) and this takes as long or longer than cutting, fitting, sewing and fitting the seats. Headliners in sedans are fun too. I had my first car done by a shop that did more antique furniture than cars and the work was not good. Bought a new walking foot sewing machine and starting doing my own work. Many shops can do the work, but few follow the details of the original Cord seats.
Pat Leahy
Yes, correct, making new ÔÇ£socksÔÇØ for individual springs is very time consuming. And,with many cars, one has to keep careful note of which spings (height, spring rate) go where.
Same as side curtains for a touring car, more work to make a set of side curtains than to make a new top.
Many years ago Henry Portz actually made all his Cabriolet seat springs from spring steel himself. His wife made the spring bags. Those seats were a labor of love and very nice looking too.
Gary Parsons
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
