I have never seen the cap on the left and believe its not correct. I believe the cap on the right is correct but will look at mine later today and confirm this.
 
 
Gary Parsons
Attached are some pictures of the cap I made. I was working from pictures of an original cap. Note the construction of the cap. It has two strips that are bent to form four legs. The legs are riveted to the top cap. The legs are brazed to a lower cap which has a hole and a disc welded to partially block the hole.In the original the lower cap and disc are one piece in which the disc had been punched to open it. 
Auburn and L-29 Cord use similar caps if not the same.
CORDially Mike
Hi Curt,
The Cord 810-812 did not have the two extra "spacers" on the bottom. They only had one.
Jim
Mine was cad plated when we got the car in 1961
 
 
Gary Parsons
Seller has other Cord items also.
CORDially Mike
Seller has other Cord items also.
CORDially Mike
 
Yes he does and they are the REAL TREASURES associated with any Cord. Very easy to talk with or buy from. Never an issue. I have been buying from this seller for many years.
 
 
Gary Parsons
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.

.jpg.a126e0ad1ecade95878d99e174c06ee2.webp)









