Try "Restoration Specialities" their catalogue is online.
They are a good source of a huge range of items.
if you have an extra window regulator with a double coil spring, remove the spring , cut the extra coil off and bend the end for the hook. Works great.
I have an extra.
My spring came today. What balinwire suggested is an exact copy of our trunk spring. Will post pics later showing it.Now my question is was this a Cord only spring that GM found would work for them or did Cord find this GM part worked well for use...Sometimes it gets a little deep in my questioning...
 
 
Gary Parsons
Well I was wrong about the spring pictured here by balinwire as to be exact. Our original is .250 or just a little more wide. The replacement GM spring is .300 plus maybe a thousands or two. So its bout 50 thousands wider. Some spring modification will need to be made for it to fit the lock area that has been crushed down to capture it.See pics..
Yes I have that flipper and spring but... Have no idea how its supposed to work. Its 1030 pm here in California. Tomorrow I will take pica and post them.Maybe you can show me how its supposed to work.
 
 
Gary Parsons
I have never seen a front flipper but here are some pics of what my hood support looks like without the spring. I have purchased all the springs a member has offered on ebay. He found an old US company that has the nearly 100 year old spring making machines to make nearly any spring for our cars.Gary Parsons
if you have an extra window regulator with a double coil spring, remove the spring , cut the extra coil off and bend the end for the hook. Works great.I am looking for a Trunk spring for my 37 Beverly. This is the trunk support crossword solver sip calculator epfo spring for the support latch. I have tried Auburn Cord and they do not have it. Is there a substitute out there? 
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.


























