Hi Gary. Do you have a copy of the CORD SERVICE MANUEL which is available at the Auburn Museum?
It has some drawings on the installation as well as description.
Here is a picture of the manual choke at the carb

Gary I had a look at the book last night, Service Bulletin No 21 refers to a supercharged carburetor which I am not familuar with however it mentions replacing the automatic choke mechanism.
I guess the automatic choke mechanism was common to both types of carburetor.
Attached is the instruction sheet.

Thanks Terry n Pat. This helped me determine I do not have the part that actually connects to the choke shaft. In the pictures it points to the front of the car??? this places the mechanical choke on the drivers side of the carburetor like is found on the 36 model 810 cars. Or am I reading it wrong?
Gary Parsons
Gary ParsonsApr 19, 2026 Thanks Terry n Pat. This helped me determine I do not have the part that actually connects to the choke shaft. In the pictures it points to the front of the car??? this places the mechanical choke on the drivers side of the carburetor like is found on the 36 model 810 cars. Or am I reading it wrong?
Gary Parsons
Hi Gary, yes the automatic choke mechanism is on the LHS consequently the manual choke mechanism will be on the LHS.
The float chamber top on my carburetor was slightly warped in the outer corners so I made up a metal cover plate that exerts some pressure above the warped corners. This has worked well.


Terry it works better to say drivers or passenger side. That way anyone standing anywhere around the car in any direction looking forwards or backwards knows exactly where something is. At least it works better for me. In your picture you pointed out the electric choke is on the left side. Thats the drivers side. The carburetor I got this manual linkage from came off a of a La Salle. It had both types of chokes and the electric was on the drivers side but the manual was on the passenger side. That carb had a vent built into the top cover so it was NOT an EE15 from any Cord.. I did not see the actual link that fits on the manual side so my suspicions are it was never functioning. I searched the internet and found most 36 Cord cars had the manual choke on the drivers side of the carb but the 37 cars had a mish mash of both sides equally. Once again all Cords are the same but they are all different....
Gary Parsons
Sorry Gary I have to deal with RHD as well as LHD Cords here in OZ.
Easier to say LHD or RHD etc in future.
All EE15 carburetors had the automatic choke on the LH driver's side, production dictated that.
I don't have any hands on experience with the supercharged carburetor.
The automatic choke was innovative at the time, incredibly mine continues to work ninty years after it left the Factory.
Funny how the dashboard Choke Lever became obsolete during the design phase.
The 812 supercharged model used Stromberg type AA-25 number A-18492.
Jon
I am not sure why the picture I posted show the cable coming in the front, but none of my cars are that way. Three of my cars are on drivers side (LHD) and one on passenger side. I originally used the electric unit, but never liked it, so I changed to manual.
Pat Leahy
Well now that I know I need the piece that attaches to the choke shaft called a choke shaft lever. Anyone know where I can buy, beg to copy one? The lever I need is in the first picture supplied by Part in the lower right corner.
Gary Parsons
Gary.
You should be able to make the parts using the drawing as a reference. It does not have to be a perfect copy as all you really want to do is open and close the choke manually.
37beverlyApr 20, 2026 I am not sure why the picture I posted show the cable coming in the front, but none of my cars are that way. Three of my cars are on drivers side (LHD) and one on passenger side. I originally used the electric unit, but never liked it, so I changed to manual.
Pat Leahy
See Item No 12 on the Factory instruction sheet I posted above.
I'm amazed reading number about step number 12...... This is very foreign to me because I have never seen any choke cable coming in to the carburetor from the front of the car engine. This kind of tells me why looking at so many center quadrants I'm seeing the choke lever nearly at the bottom. I wonder if routing the cable in from the front is how the lever will be set at the top which is a better looking dash arrangement in my views... Ha we discovered the "correct look" for the manual choke lever or am I really confused by the factory drawings? I do like discovery...
Gary Parsons
Not sure if item #12 was followed by dealers who installed these as a retrofit to the original.
Pat Leahy
37beverlyApr 21, 2026 Not sure if item #12 was followed by dealers who installed these as a retrofit to the original.
Pat Leahy
I agree with you Pat because in my years of watching what is under the hood of many Cords I have NEVER seen a manual choke cable run from the firewall up around the carburetor and connect on the drivers side instead of the passenger side from the firewall.
I just talked with Jon E. Hardgrove of the Carburetor Shop LLC in Missouri. He told me no manual parts for the EE15 were ever supplied or offered from Stromberg as per his documentation... And ALL EE15 carburetors supplied for the Cord cars came with electric chokes..... They were a "timed delay" type heating unit. Many found them not effective during the really cold areas so they wanted the manual. He dose not know who supplied the manual kits. But it clearly shows how to install one from Auburn with the picture details seen in this post.... So now I want to find who supplied them to Auburn. He also gave me the part number for the electric choke and advised me NOT to use the EE15 found on the 1937 La Salle cars. The jets are different as is the throttle connections are on the wrong side plus much more...
Gary Parsons
Guys, in the persuit of "correct" restoration the Factory supplied instructions should be followed to the letter.
Gary my best guess it that the number of conversion kits made would not have been a large number.
The Connersville Plant was known for metal stamping parts. It could all have been done inhouse.
Terry you are probably correct because in the engineering changes book you posted that this change to manual kit could be purchased from Auburn for $3.95 cents. The instructions tell a mechanic or owner to route the cable around the front of the carb air horn so I'm seeing that as working the choke manually from the front or drivers side of the carb. I have a couple of under the hood experts that are lead judges at Auburn each year I want to talk to about this being a sticking point during judging. How do they judge this area. Is it that big of a deal which way the cable gets the job done. What was fascinating the most is Jon who "knows Stromberg's" had nothing on the manual chokes and had no listing in his documentation. But I probably wont be changing my carb to the electric choke no matter what. It remains to be seen how this turns out. Discovery is a wonderful thing....
Gary Parsons
Here's a picture of a right side manual choke on a 1936 Cord phaeton that was for sale at the recent Kruse Auction in Auburn

Thanks Pat. I noticed the manual choke cable runs from the drivers side of the firewall for some reason. About ever manual choke Cord I have seen has the cable running from the passenger side of the firewall. This engine appears to be a 1937 engine because it may have the GCO 4804-A Autolite generator. The 36 cars had the GAR4630 generator and a much different mounting bracket. I suspect this was a "driver" Cord by the way things appear under the hood. Nothing wrong with cad plated spark plugs or modern hose clamps but not acceptable on the show field to be judged... I especially like the support bracket made for the horn trumpet. Seems like a great idea. Any Cord is a dream come true in a persons collection. They stand out for the era they were designed in. Still an amazing car with so many innovations never seen before on any car design...
Gary Parsons
Actually this is an early 1936 Cord phaeton. One of the first 10 phaetons built. This was restored by Jim O'brien and completed in January 2026. I think the high bid was $120K as a no sale. It also has a recent club certification. I did noticed the late alternator, horn braces and few other items that might need some revisions.
Pat Leahy
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
