Hi Gary,Attached are the instructions that came with the Henry Portz water pump rebuild kit that I purchased (I actually bought 2 of the last kits that Cathy had left). The kit included a new impeller/shaft with more vanes and a new back cover that is cast/machined to accept a ceramic spa pump seal.  Also in the kit is a brass seal surface insert to be pressed into the water pump housing after machining according to the instructions.  So far I have only used a portion of a kit to rebuild the water pump on my Westchester.  I used the new impeller and shaft as well as the new back cover.  The seal surface insert my water pump housing was in pretty good shape so I did not do the machining for the brass insert.  I was able to clean up the housing seal surface and then lap the spa seal to the housing in my drill press.  Lapping seemed to be crucial to avoiding a leak as I tried assembling the pump without lapping the seal and had leak issues.Looking at the PortzCordz website it looks like Cathy still has the brass seal inserts available (maybe you already have one).  The spa seals and the bearings are standard parts and I was able to find the part numbers for both.  Here are the part numbers that I found and used:Bearing:  SKF 6202/2RS1/C3Seals:  PS-201I hope that this is helpful, let me know if you need any additional information.Regards,Bill
Thanks Bill for the great pictures and for the answers. This is exactly what I was searching for. I wish I knew how to correctly use the search engine feature on this forum. But nothing comes up even asking different ways of the same type search. I can clearly see the impeller was machined and not a cast item but it may have been cast and then machined to the desired vane thickness.
 
 
Gary Parsons.
Hi Gary,
 
I also have had issues finding information with the search function, I think that the key words need to be just right.
 
According to the Portz website the impeller was CNC machined from bronze bar stock. ┬áHere is the link to the website, it does not seem to be easy to find with internet search engines if you donÔÇÖt know the address. ┬áIn addition to the page of parts there are a couple of nice pages about Henry and his car, definitely worth a look if you have not seen them.
 
https://www.portzcordz.com/forsale.shtml
 
Good luck with your water pump.
 
Bill
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.




