Gary I don't have any separate pictures of mine. I see in the Parts Book page 30 the Cigar Lighter is described in detail but I'm not sure if it includes the socket in the dash board.
 
It appears mine has the same bezel as the Amelia Earhart phaeton. The attached picture was taken before I made and fitted the correct cigar lighter knob. I also kept the original and worn dash board panel as it as "seen" all of the occupants from day one.
 
The guys at Lavine Restorations did a magnificent job restoring Amelia Earhart's phaeton. Thanks for the pictures Jack.
 
 
 
The JBS Collection, which owns Amelia Earhart's 812 Cord,
has some excellent photos of the dash on her vehicle.
https://thejbscollection.com/wp-content/uploads/2021/12/JBS-1937-Cord-812-details-58678.jpg
https://thejbscollection.com/wp-content/uploads/2021/12/JBS-1937-Cord-812-details-58660.jpg
https://thejbscollection.com/wp-content/uploads/2021/12/JBS-1937-Cord-812-details-58711.jpg
 
My 812 just has a small ring, nothing as ornate as depicted on Earhart's Cord.
The Earhart Cigar lighter appears to be a reproduction. Its very nice looking too. I wish I could have looked closer at it during the best of show judging at Auburn a few years ago..
 
 
Gary Parsons
Gary in case you didn't notice I had updated my previous posting. The bezel on my lighter socket appears to be the same as that in the Earhart phaeton.
I can measure it up if you want .
Terry your socket bezel appears correct as does the Earhart Bezel. I need the actual determining part numbers for the socket. The 36 did not have the pop out when ready option. Only the 37 cars had the pop out when ready option.
 
 
Gary Parsons
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.

