I recently restored a set of fog lamps with the fluted reflector shells for my Cord which is an early production car so I guess I have the correct lights. I played around with the globe focus adjustment which gave amazing results. The globes can be moved back and forth about 8 mm or 5/16"Fully out gives a hazy round light pattern.Half way gives a rectangular patternCompletely back gives a flat strip light which I assume is idea for driving in the fog.The garage door was about 16 feet from the lights.Actually the light tested was not on the car at the time, hence the patters were all up too high.One other point how were the fog lamps originally wired up? With cables and grommets through the body or flexible metal conduit around the front of the body??????????I opted to use stainless steel flexible conduit which looks great but was considerably more work.
 
Looks like you're coming close to completion Terry! Very nice.
 
Cort
Thanks Cort, yes it is almost ready for the road again. The restoration has taken eight years. It has moved along very slowly at times however I didn't want to cut corners but do the restoration properly. The Actonite Cord lives again in its original colours. I plan to put some videos on the car on You Tube.
She runs smoothly and changes gears like a dream.
Pity I can't drive her along to Connersville and Auburn.
Any rich benefactors out there ......................... HELP?
 
Cheers from Down Under
Terry
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.




