
Thanks Terry. About all I know for sure is each engine has the drivers and passenger side rods numbered for each cylinder. The numbers I posted are the cast inplace on every rod from the factory. I will look closely at all my rods for an engine serial number as you have shown. I suspect all rods are the same but need to ask questions about the different numbers. I know factually the Duesenberg rods come in the supercharged and non supercharged types. I'm not certain if the Cord roads are the same for supercharged engines. I'm thinking there was no "better" rod for those engines. I know my engine was made from two complete engines that came with the car in 1961 because the original block had a small crack. I traded that cracked block to Henry Portz in around 1976. I asked him who he sold that engine block to after he rebuilt it and repairs the crack. He did not remember. I have had the honor of looking at every car in the master book of our club historian. My engine was not found. I just wonder where it is. I have a feeling its still in California. I hope someone is NOT passing it off as an original to their Cord. Thats being dishonest.
 
 
Gary Parsons
Gary the Cord V8 was designed to take the supercharger right from the start. They found the firing order had to be changed to get the supercharged engine to run better so the camshaft had to be changed. Consequently the connecting rods would have been common to both engines.
J Model Duesenbergs were fitted with forged aluminium connecting rods.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.



