Here are the pictures Terry. I had planned to post yesterday but got busy. Hope this tells me whats going on. I need a electrical cover for the top clock. The one mounted in the dash is my original.The other is a spare.Big plus to all this is they both work wekk when hotted up. Power to a points breaker opens when it reaches full power causing the clock spring to "wind up". When the spring runs down it closes the point gap charging it up.Then opens cutting power to the clock but the spring begins the wind down. Repeat. Rather simple in design and electrical economy...Gary Parsons
Thanks mate. I didn't know how they actually worked but figured the clock would eventually run a battery down if parked for an extended period.
I believe a simple spring clip connected power to the clock that could easily be disconnected by reaching under the dash. Rick Hulett had an article in an old newsletter showing the spring clip.
The 35-36 Auburn also has a Borg Clock, but it is larger. Are you sure the clock is supposed to have a cover you refer to? Auburn clocks don't. If your clock with the contact points that arc to wind the clock doesn't work, it can often be "fixed" by polishing the contact points. You can also put a capacitor in place to lessen the arc, thus it runs longer before needing to be polished.
CORDially MIke
I would say someone replaced the rear housing and guts with a circa 1940 Buick clock.
Pete
Thanks Pat. Your information really clears up my questions. Did both type clocks have a cover for the electrical or not?
 
 
Gary Parsons
Thanks again Pat. Now I feel better being able to say these are real Cord dash clocks.
 
 
Gary Parsons
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.





