I agree with you Cliff. I see the same thing but these are very nice. This seller has something else I REALLY want but... I already made up a set. My matching amber lens came from George so you know they are correct glass. These lens do NOT have the yellowish white painted circle but they do have the three raised ridges where the paint is applied.
The lights also donÔÇÖt have the preferred pinched lens retainer ring.
 
Cliff what are you talking about? I see in the last picture clearly the special 6 sided hexagon bolts for the fastener ring and the brackets. Am not sure what you are referring to...
 
 
Gary Parsons
Cliff, thanks for the email. I believe I found what you may have been talking about on ebay. Is this the preferred pinch ring?
Pete, you obviously have a wonderful collection of rare and interesting material.
Any chance of running an iron over the two instruction sheets to flatten them out so that we can make good copies and reposting them .................................. ...................................................... Please?
Well... It seems I have been misled about the lens ring and the fastener for "a few years" by well meaning others. Just to get this FINALLY correct... The retainer ring for the lens has to be the type you have shown Pete with the pinch type fastener...Because the lens is cracked and useless to anyone I made an offer of $50.00. It was declined. So I made another offer of $65.00.... I received a counter offer of $96.50....... So I sent the seller a message explaining the lens was useless and all I was interested in was the pinch ring and the fastener for same... I will NOT be making another offer...
 
 
Gary Parsons
Afternoon Cliff
I agree with you; they look different BUT the front of the car is a photo and the fog lights are drawings. I am assuming that the fog lights were not in hand at the time of printing the accessory booklet and the fog lights shown in the drawing were not chosen but Fog Kings were substituted in their place. That is my explanation.
Pete, in addition to my previous request for "flat" pictures of the instruction installation sheets, was there a switch supplied with the lights originally?
Also was there a preferred mounting position for the light switch in any literature that you have?
VERY NICE Terry. Everything looks better than original. I'm impressed with your workmanship and attention to detail....
 
 
Gary Parsons
Thanks Gary. There are lots of ways to do a job. I think having a Cord is a privilege consequently it needs to be looked after properly, the restoration as such should be done correctly or to the best of one's abilities.
The jack base and shaft are just for show.
Thanks Gary. There are lots of ways to do a job. I think having a Cord is a privilege consequently it needs to be looked after properly, the restoration as such should be done correctly or to the best of one's abilities.
The jack base and shaft are just for show.
 
I recall you showing me the way you made the base. Its impressive to say the least. Anyone actually trying to use the original bumper jack learns very quickly it bumper bar bends upwards damaging the body and fender... So I'm told by others. so originals got thrown out and scissors jacks were used under the frames or axles.
 
 
Gary Parsons
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.










