My drive shafts are fine Jim. My idea is to hard chrome the bells where the seals slide up n down on the inner universals and the bells to the outer universals that slides left n right as we steer the car.
 
 
Gary Parsons
Gary,
Why hard chrome? Hard chrome is for high loads and heavy wear, neither of which you have here. THe bells were cad plated to provide corrosion resistance and added lubrication. Unless there are other problems this works very well.
Jim
Jim my idea was to provide a smooth seal surface so as not to wear down the seals on the bells. Many times shafts on hydraulic cylinders are hard chromed to build them up after years of wear. It makes a great surface for a seal to ride on. I knew about the cad plating but feel its not a smooth surface. I will look deeper into this. I do appreciate yours and Georges comments. You guys have forgotten more about the Cords than I know about them. I'm always amazed with your answers to many questions. Jim your articles in the news letter are very well written.Showing a write-up with pictures is a great way to help everyone.
 
 
Gary Parsons
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
