Thank you Wyn for sharing this information. I have only seen one supposedly made thru Felix. It did not hae any internal fastening ring installed but it was with what I saw. I'm not sure if it was the third or forth type made. I do have a nice set of repros that are chromed very well and a set of the non vented covers made sometime in the mid 1950's by Dallas.... Not sure what I will do with them. I believe the early 35 or 36 prototypes had the non vented covers. But the 36 had built show cars all had the vented type everyone wants...
 
 
Gary Parsons
I have a set of originals and I really can't tell the difference with the ones recently made by ACD Factory. Mine are at the chromer's now or I would send you a photo.
 
Its the difference in the height of the cover dome away from the wheel. The taller the dome is the more likely they are to be damaged by rubbing curbs. I have never seen the difference side by side.
 
 
Gary Parsons
Wyn,
Who does your chrome plating? I have a set of hubcaps 'In the raw."
We don't platers in North Carolina.
Many, many thanks!
Bill
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
