I would use a cloth braided wire or a cloth braided wire with armor winding over it and I would use a period aluminum clip to attach to the wiring harness. You may want to put a relay into the fog circuit.
 
https://brillman.com/product/12-gauge-cotton-braided-primary-wire/
 
If you want to integrate a ground wire:
https://brillman.com/product/14-gauge-double-conductor-armor-covered-cotton-braided-primary-wire/
 
If you do not wan to integrate a ground wire:
https://brillman.com/product/14-gauge-single-conductor-armor-covered-cotton-braided-primary-wire/
 
For wire ties: See page 12 of:
file:///C:/Users/Admin/Downloads/download.pdf
Aluminum ELE172 $4.00
The fog lights were installed by dealers. I believe each dealer installed them their own way.
 
If you use the fog lights as turn signals with LED bulbs you need to use an electronic flasher. If you use regular bulbs you are OK with a standard flasher.
Thanks Jim. Very good suggestions. I saw a Duesenberg and an Auburn a few years ago that had turn indicator lights clipped on the front and rear bumpers that was wireless. As was explained they easily come off for judging and wont leave marks. For now that is my plan for turn indicator lights. More investigation on my park needs to be done yet.
 
 
Gary Parsons
Cool! I have a month or two before I'll be ready to mount the lamps. Please post your methodology when you get around to trying this.
Thanx!
I have an original set of Fog King lamps without Auburn mounts (still lookin'). Is this a pipe dream' date=' is it possible to wire these to serve both as turn indicators AND fog lamps with the understanding they couldn't be both at the same time?[/quote'] 
You may be able to get a small bulb and socket into the reflectors and buckets (you do not have much room though), but my guess is you can find dome sort of dual filament bulb that will work to allow both turn and fogs.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
