thanks for the perfect picture. I sure wouldn't have imagined this is how they fit. Sadly my car did not come with these on it.
 
 
Gary Parsons
nice photo, the band looks like 1" slice of 2 1/2" radiator hose would work. The spindle grease overflow copper tube has a metal band to hold it to the swing arm, very nice details. Nice to see minimum use of cad hardware preserving factory type appearance. There were two types of outer joint covers, this 37? has four screws holding it to spindle housing. There was another earlier style that has a fine threaded sleeve tube. I once asked JM why the change? He answered my question, "It was because of cost, and cheaper to make as the company wanted to save $ in 1937".
I am not sure of the details but if anyone knows, this was a great suspension, not often discussed and light years ahead of anything else at the time.
Built from the gathered L29 experience with improved weight and c/v spindle configuration
I have read that when the engineers studied the Citroen FWD gear box they also looked at the Citroen wish bone suspension but opted for their own design to handle the weight. The Cord suspension is simple and robust but during the current restoration of my Cord I wished that they had made provision for adjusting the locations of the trailing arms with self aligning inner bearings and shims for the outer bearings. My front end had been damaged during a collision in the dim past. It has been straightened out the best we could do. I should imagine others have faced the same problem.
Overall when you get under the front end of a Cord and study it they did a great job maintaining simplicity of design within a pretty compact area.
Hat's off to the design team. The members present at the early Auburn Meets had the privilege of speaking with the engineers who designed the cars. Pity we can't turn back the clock to ask more questions.
Thanks Terry for the great picture of what has been discussed here for a long time. This topic leaves no questions as to how this fits.
I do see two other thing in your pictures I question.What is wraped around the ball joint arm and what type of outer universal joints are you using?
 
 
Gary Parsons
Hi Gary, when my Cord arrived in Australia is was fitted with molded rubber covers on all of the ball joints to keep dirt out and grease contained. They were all deteriorated so I made replacements. Nobody whom I contacted had any knowledge of them or where I could get replacements.
I'm running a set of Richardson drive shafts complete with modern CV joints.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.




.jpg.f0b3ed3a2728f6447e70847079be0651.webp)

