Terry is there a part number and makers name on this pictured dash light dimmer switch? Your black mounting piece is different from mine. It appears the dimmer switch mounts were cut off but why I can only assume for mounting a replacement dimmer switch. I don't recall if I ever had a dimmer switch on my car. Memory is hazy thinking back 45 years when I rewired the car with mostly the same color wire just to see if things really worked. When I saw the dash lit up after dark I was very impressed. The greenish color was outstanding.I just do not recall if I was able to dim the dash lights or not or if they came on full brightness when the headlights were switched on. So I probably will be searching for the mounting piece and a rheostat switch in the future... Knowing what I'm looking for or what other cars this may have come on will help.
 
 
Gary Parsons
Gary I will have a look under the dash tomorrow as the items are installed in the car. The black mounting bracket or frame that you referred to is a complicated cast iron casting that ties a lot of pieces together. I was rather impressed with it when I first examined it. Today it would be moulded plastic. There was quite a bit of machining in it's production to produce flat surfaces and drill various holes. You will have to get a replacement.
Thanks Terry for being a wonderful source of information on most anything I ask. This is a picture of what I have so I'm now searching for this and the rheostat. Terry I noticed your springs are missing several compared to mine. Did you remove them or are they missing. They are available made new by an old spring maker from long ago.
Gary, I had a look under the dash today and could not see any numbers or manufacturer's name.
Regarding the springs across the pivot shaft maybe some were removed in the past?
I reassembled it the way it operated in the car. It worked that way for many years.
You will have to advertise for a rheostat switch and cast mounting bracket.
Thanks again Terry. Am looking for the rheostat now.May end up making one from other rheostat switches I have looked at on ebay.
I did source the bracket. Took delivery last weeks. Sent it thru my Arm n Hammer Laundry and battery charger soak to remove some rust. Painted as yours is.Been putting this all together but...I do not know what the "trick" is for getting all 6 springs back in place. I have two sets. The old set you see in my pics and a new set I purchased a few years ago. Just trying to make it work before I paint and chrome pieces. Just feel like I'm missing something...
 
 
Gary Parsons
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.







