To the best of my knowledge the brake and clutch pedal rubbers are correct however the accelerator pedal should be slightly pointed at the top. The accelerator pedal supplied by Stan has the same general shape but it has a bend near the bottom whereas it should be flat. I have attached a sketch of the pedal supplied by Stan ................. it will do the job. When installing the accelerator pedal I had to make longer than standard ball ended bolts for the pedal to engage with. Floor insulation was probably the root cause.
Curt, I tried sending you an email using thecarguy@pressenter.com but it bounced.
My email address is tandgc@outlook.com
Can you email me please?
Thanks,
Terry
Hi Curt,
I am interested in a set of the pedals as well. Please send me a private message with information with the details.
Thank you.
Bill Kastanis
In one of the pictures I posted show some additional hardware that is common to 34-36 Auburn, those parts are sold separately . Those pix are just a file photos to show the pedal pads and gas pedal.
My email address is: auburnsmidwest@gmail.com
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.










