Here are some finished machining pics. Nothing like what Henry was doing but it will work. The pump suction is always flooded with trans oil. I sure would like to see an oil pump rebuilt by Henry now. His picture is not clear in the detail as to how or what was done. I'm now thinking the body has at least 3 pieces under the cover.Maybe 2 but I'm not able to determine how the gear body bushings are installed or made. What Henry did looks very costly..
Hello Mike,
I know the clearance needs to be kept to a minimum but I think you have the decimal point in the wrong place, 0.001"to 0.002" clearance is hard to achieve but 0.0001" to 0.0002 " clearance is very difficult to achieve if not impossible in the 1930"s. From my experience if you do the best yo can on the conventional machine tools 0.002" to 0.005" clearance is as good as you can get and most likely as good as production facilities in the 1930's.
The picture of the modified "grease pump" was taken in Henry Portz work shop when we visited in 2015. Henry increased the pump flow rate by fitting longer gears and a spacer between the pump body and cover plate. The radial clearance of the gears is minimal and this helps keep the pressure up when the oil heats up and thins down. Gary looking at the gears in your pump there appears to be at least 10 to 20 thou clearance between the gear teeth and the case.
Henry didn't mind me taking the picture he was a very kind person who would share information.
Hi 1748 S
I figure the wheels on his salt flat car would have to be less than 2"
Was he pulling your leg?
Obviously my decimal point was in the wrong place, I stand corrected. It was just a test!!!!
CORDiallyMike
What should be kept in mind is SAE engine oil and 90W gear oil do not use the same viscosity scales. According to Lubriplate 90W gear oil is comparable in viscosity to 50W SAE engine oil. .
CORDiallyMike
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.
















