At 8 thousands runout the gears will bind. Replace the shaft
1
· Mar 17, 2018
Thanks for this information Jim. My measurements were taken on my craftsman 12 inch lathe using a 3 jaw chuck. Run-out has not been checked on the lathe because its new to me. I purchased it reciently. So my plan is to build a set of V blocks using 2 roller bearing on each piece. then rest the shaft in the rollers and recheck my run out. I will post pics and readings then.
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.