Thanks for the comment John. Can you tell me 3 things about this latch please?
Is this a correct key
 
How does this locking mechanism work with the bottom piece that connects to under the trunk valance
 
 
Is the bottom part the same as the left bottom non locking latch? Thanks for any help.
The difference is in the cover over the key hole. I've never seen the "Chrysler" version on an actual car, but in the early '70's at Carlisle I saw a trunk lid that had them. The vendor said it was from a '35 Plymouth.
The receiving part that attaches below the lid is the same, for either side. I have found two versions of these, one with a slight bend inward at about the bottom of the "hook", the other smooth.
Cord vs. "Chrysler" locking trunk latches
Well my latch looks like this but I do not have the cover on mine. My lower valance piece looks like the part on the left with the holes in it.I even have the original bolts and screws with that piece. Seems the more I know.. the less I know... Cords had plenty of revisions as Josh once mentioned long ago.
Your "valence piece" with holes is the same as on my '37 renumbered '36 Armchair Beverly fastback. The one shown in my picture on the right with integrated studs was one I obtained probably along with the "Chrysler" latches some years back.
You could reproduce a cover for over the keyhole without too much trouble.
Does the chrysler unit need modification to work on a Cord or will it work as is?  Also, will the Chrysler valence side piece work with Cord style latches?
 
Thanks!
To join in the conversation, you must be a club member.
You’re welcome to read and like every post. Members can reply and start topics of their own.






